Semiconductor & Computer Engineering
(→Industry) |
(→250 nm Microprocessors) |
||
| Line 74: | Line 74: | ||
** {{intel|Celeron}} Notebook, 266-466 MHz, January 1999 | ** {{intel|Celeron}} Notebook, 266-466 MHz, January 1999 | ||
** {{intel|Pentium III}}, 450-600 MHz, February 1999 | ** {{intel|Pentium III}}, 450-600 MHz, February 1999 | ||
| + | * MIPS | ||
| + | ** {{mips|R10000}}, 1997, fab'ed by NEC | ||
{{expand list}} | {{expand list}} | ||
== 250 nm Microarchitectures == | == 250 nm Microarchitectures == | ||
{{expand list}} | {{expand list}} | ||
Revision as of 09:09, 24 April 2016
Semiconductor lithography processes technology
The 250 nm lithography process is a full node semiconductor manufacturing process following the 350 nm process node. Commercial integrated circuit manufacturing using 250 nm process began in 1997 and was eventually replaced by 180 nm by 1999.
Industry
The 0.25 µm-based process entered production at Intel in 1997. Intel original 0.25 micron process was named P856 or Process 856. A second process, named P856.5, was a 5% linear shrink of the original design rules. The shrink, which enabled a high equipment re-use resulted in a smaller, 9.26 µm2, 6T SRAM. The process used 200 mm wafers, SiO2 dielectric and polysilicon electode. It used Al inter-connects and an Si channels.
| Fab |
|---|
| Type |
| Contacted Gate Pitch |
| Interconnect Pitch (M1P) |
| SRAM bit cell |
Design Rules
| Intel 0.25 micron Design Rules (P856) | |||
|---|---|---|---|
| Layer | Pitch | Thick | Aspect Ratio |
| Isolation | ? nm | ? nm | - |
| Polysilicon | ? nm | ? nm | - |
| Metal 1 | 640 nm | 480 nm | 1.6 |
| Metal 2 | 930 nm | 900 nm | 2.0 |
| Metal 3 | 930 nm | 900 nm | 2.0 |
| Metal 4 | 1.60 µm | 1.325 µm | 1.7 |
| Metal 5 | 2.56 µm | 1.900 nm | 1.6 |
| Intel 0.25 %5 shrink micron Design Rules (P856.5) | |||
|---|---|---|---|
| Layer | Pitch | Thick | Aspect Ratio |
| Isolation | ? nm | ? nm | - |
| Polysilicon | ? nm | ? nm | - |
| Metal 1 | 608 nm | 480 nm | 1.6 |
| Metal 2 | 882 nm | 900 nm | 2.0 |
| Metal 3 | 882 nm | 900 nm | 2.0 |
| Metal 4 | 1.520 µm | 1.325 µm | 1.7 |
| Metal 5 | 2.432 µm | 1.900 nm | 1.6 |
250 nm Microprocessors
- Intel
- Pentium MMX, 200-300 MHz September, 1997
- Pentium II, 333-450 MHz, January 1998
- Pentium II Notebook, 233-300 MHz, April 1998
- Celeron, 200-300 MHz, April 1998
- Celeron, 300-533 MHz, August 1998
- Celeron Notebook, 266-466 MHz, January 1999
- Pentium III, 450-600 MHz, February 1999
- MIPS
- R10000, 1997, fab'ed by NEC
This list is incomplete; you can help by expanding it.
250 nm Microarchitectures
This list is incomplete; you can help by expanding it.