The 250 nm lithography process is a full node semiconductor manufacturing process following the 350 nm process node. Commercial integrated circuit manufacturing using 250 nm process began in 1997 and was eventually replaced by 180 nm by 1999.
Industry
The 0.25 µm-based process entered production at Intel in 1997. Intel original 0.25 micron process was named P856 or Process 856. A second process, named P856.5, was a 5% linear shrink of the original design rules. The shrink, which enabled a high equipment re-use resulted in a smaller, 9.26 µm2, 6T SRAM. The process used 200 mm wafers, SiO2 dielectric and polysilicon electode. It used Al inter-connects and an Si channels.
Fab |
---|
Process Name |
1st Production |
Metal Layers |
|
Contacted Gate Pitch |
Interconnect Pitch (M1P) |
SRAM bit cell |
Intel | IBM | AMD | TI | DEC | IDT | Fujitsu | TSMC | Samsung | Toshiba | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
P856 | CMOS-6X | CS-44/CS44E/CS44E-Mod | C07 | CMOS-7 | CMOS-10+ | CS-70 | |||||||||||||
1997 | 1997 | 1998 | 1999 | ? | ? | ? | ? | 1998 | 1998 | ||||||||||
5 | 5 | 5 | 4 | ||||||||||||||||
Value | 350 nm Δ | Value | 350 nm Δ | Value | 350 nm Δ | Value | 350 nm Δ | Value | 350 nm Δ | Value | 350 nm Δ | Value | 350 nm Δ | Value | 350 nm Δ | Value | 350 nm Δ | Value | 350 nm Δ |
500 nm | 0.91x | ? nm | ?x | ? nm | ?x | ? nm | ?x | ? nm | ?x | ? nm | ?x | ? nm | ?x | ? nm | ?x | ? nm | ?x | ? nm | ?x |
640 nm | 0.72x | 700 nm | ?x | 880 nm | ?x | 850 nm | ?x | 840 nm | ?x | 940 nm | ?x | 900 nm | ?x | ? nm | ?x | ? nm | ?x | ? nm | ?x |
10.26 µm2 | 0.57x | 8.6 µm2 | ?x | ? µm2 | ?x | 10.5 µm2 | ?x | 11.5 µm2 | ?x | 11.2 µm2 | ?x | ? µm2 | ?x | 7.56 µm2 | ?x | ? µm2 | ?x | ? µm2 | ?x |
Design Rules
Intel 0.25 micron Design Rules (P856) | |||
---|---|---|---|
Layer | Pitch | Thick | Aspect Ratio |
Isolation | ? nm | ? nm | - |
Polysilicon | ? nm | ? nm | - |
Metal 1 | 640 nm | 480 nm | 1.6 |
Metal 2 | 930 nm | 900 nm | 2.0 |
Metal 3 | 930 nm | 900 nm | 2.0 |
Metal 4 | 1.60 µm | 1.325 µm | 1.7 |
Metal 5 | 2.56 µm | 1.900 nm | 1.6 |
Intel 0.25 %5 shrink micron Design Rules (P856.5) | |||
---|---|---|---|
Layer | Pitch | Thick | Aspect Ratio |
Isolation | ? nm | ? nm | - |
Polysilicon | ? nm | ? nm | - |
Metal 1 | 608 nm | 480 nm | 1.6 |
Metal 2 | 882 nm | 900 nm | 2.0 |
Metal 3 | 882 nm | 900 nm | 2.0 |
Metal 4 | 1.520 µm | 1.325 µm | 1.7 |
Metal 5 | 2.432 µm | 1.900 nm | 1.6 |
250 nm Microprocessors
- Intel
- Pentium MMX, 200-300 MHz September, 1997
- Pentium II, 333-450 MHz, January 1998
- Mobile Pentium II, 233-300 MHz, April 1998
- Pentium II Xeon
- Celeron, 200-300 MHz, April 1998
- Celeron, 300-533 MHz, August 1998
- Celeron Notebook, 266-466 MHz, January 1999
- Pentium III, 450-600 MHz, February 1999
- Pentium III Xeon
- MIPS
- R10000, 1997, fab'ed by NEC
- AMD
- IBM
- DEC
- Sun
This list is incomplete; you can help by expanding it.
250 nm Microarchitectures
This list is incomplete; you can help by expanding it.