Revision as of 00:41, 23 March 2017

Bonnell was a microarchitecture for Intel's 45 nm ultra-low power microprocessors first introduced in 2008 for their then-new Atom family. Bonnell, which was named after the highest point in Austin - Mount Bonnell, was Intel's first x86-compatible microarchitecture designed to target the ultra-low power market.

Codenames

Generation successor

Release Dates

Bonnell was first announced on April 2nd 2008 during the Intel Developers Forum in Shanghai.

Process Technology

Bonell is designed to be manufactured using a 45 nm process. Intel's 45 nm process is the first high-volume manufacturing process to introduce High-k + metal gate transistors.

Compiler support

Architecture

Bonnell features a brand new architecture not based on any previous Intel design. The architecture was specifically designed for ultra-mobile PCs (UMPCs), mobile internet devices (MID), and other embedded devices. Bonnell's primary goals were:

1. Reduce power consumption,
2. while staying fully x86-compatible,
3. at acceptable performance

Performance/Power new rule: +1% performance for at most +1% power consumption.

Architecture

• Strictly ultra-low power
  • 90%+ lower power than 90 nm Pentium M
• 45 nm process, 9 metal layers, CMOS
• 500 mW to 2 W TDP
• 533 MT/s dual mode (GTL & CMOS) FSB
• In-order
• 2-issue decode
• Simple 2-way SMT
• Instruction Queue of 16 entries/thread
• FP Register File (per thread)
• Integer Register File (per thread)
• Private L1 cache for each core
• Shared L2 cache for the entire chip

The number of functional units were kept to minimum to cut on power consumption.

• 2 address generation units (AGUs)
• 2 Integer ALUs (1 for jumps, 1 for shifts)
• 2 FP ALUs (1 adder, 1 for others)
• No Integer multiplier & divider (shared with FP ALU instead)

Memory Hierarchy

• Cache
  • Hardware prefetchers
  • C6 cache
    • 10.5 KiB array to hold the architectural state during deep power down state
  • L1 Data Cache
    • 32 KiB
    • 8-way set associative
      • 1 read and 1 write port
      • 8 transistors (instead of 6) to reduce voltage
  • L1 Instruction Cache
    • 24 KiB
    • 6-way set associative
      • 1 read and 1 write port
      • 8 transistors (instead of 6) to reduce voltage
    • Per core
  • L2 Cache:
    • 512 KiB 8-way set associative
    • ECC
    • Shrinkable from 512 KiB to 128 KiB (2-way)
    • Per core
  • L3 Cache:
    • No level 3 cache
  • RAM
    • Maximum of 2 GiB, 4 GiB, and 8 GiB

Note that the L1 cache for data and instructions were originally both 32 KiB (8-way), however due to power restrictions, the L1d$ was later reduced to 24 KiB.

Pipeline

Bonnell's architecture shares very little in common with other Intel designs. To achieve the strict ultra-low power objects, Bonnell features a very slimmed own design discarding many high-performance techniques used by Intel's high-performance architectures such as aggressive speculative execution, out-of-order execution, and µop transformation.

Bonnell consists of an in-order dual-issue 16-stage pipeline. Bonnell supports 2-way SMT

The longer pipeline allows a more evenly spreading of heat across the chip with more units. This also allows a higher clock rate.

• Instruction Fetch
  • 3 stages
  • 8 Bytes/Cycle (lower if SMT)
• Instruction Decode
  • 3 stages
  • Instructions with up to 3 prefixes/Cycle
• Instruction Dispatch
  • 2 stages
• Source Operand Read
  • 1 stage
    • reading register operand
• Data Cache Access
  • 3 stages
    • 1 stage for calculating
    • 2 stages for reading cache
• Execution
  • 2 clusters
    • integers
      • quick cache access due to direct connection
    • floating point & SIMD
• Exception & MT Handling
  • 2 stages
• Commit
  • 1 stage

Multithreading

Bonnell has support for multithreading - up to two threads per core. However each thread compete for the same resources which does inherently means they run slower than they would if they were to run alone.

Branch Prediction

• Two-level adaptive predictor
• 12-bit branch history register
• Pattern history table has 4096 entries (shared between threads)
• Branch buffer target has 128 entries (4-way, 32 sets)
• Unconditional jumps are ignored
• Always-taken and never-taken are marked in the table
• Penalties:
  • 13 stages for miss prediction
  • 7 stages for correct prediction but missing branch target buffer (BTB)

Die

• 45 nm process
• 9 metal layers
• 47,000,000 transistors
• 3.1 mm x 7.8 mm
• 24.2 mm² die size

• BIC - Bus Interface Cluster
• MEC - Memory Cluster Execution & L1d$
• FPC - FP/SIMD execution Cluster
• IEC - Integer Execution Cluster
• FEC - Front-End Cluster & L1i$
• FSB - Front Side Bus

Cores

First Generation

First generation of Bonnell-based microprocessors introduced 2 cores: Silverthorne for ultra-mobile PCs and mobile Internet devices (MIDs) and Diamondville for ultra cheap notebooks and desktops.

Silverthorne

Main article: Silverthorne

Silverthorne was the codename for a series of Mobile Internet Devices (MIDs) introduced in 2008. These processors had 1 core and 2 threads with a FSB operating at 400 MHz-533 MHz.

Diamondville

Main article: Diamondville

Diamondville was the codename for the series of ultra cheap notebooks and desktops introduced in 2008. Diamondville is very much a soldered-on-motherboard derivative of Silverthorne with faster FSB (operating at 533 MHz - 667 MHz). The dual-core version is an MCM (Multi Chip Module) Silverthorne variant.

Second Generation

First generation of Bonnell-based microprocessors while being low power had to work with the older 90 nm process 945GSE chipset and 82801GBM I/O controller with a TDP of almost 9.5 watts - almost 4 times that of the processor itself. Second generation Bonnell-based microprocessors aimed to address this issue by integrating a memory controller and GPU on-chip. This drastically reduced power consumption and cost.

Lincroft

Main article: Lincroft

Lincroft is the codename for Bonnell-based Silverthorne's successor. Lincroft integrates on-die the graphics and memory controller.

Pineview

Main article: Pineview

Pineview was the codename for second generate Bonnell-based processors which integrated a memory controller, Direct Media Interface (DMI) link, and the GMA 3150 GPU. Pineview is the successor for Diamondville, targeting the same ultra cheap desktops, nettops and netbooks.

Tunnel Creek

Main article: Tunnel Creek

Tunnel Creek was the codename for a series of MPUs for embedded applications.

Stellarton

Main article: Stellarton

Stellarton was the codename for a series of MPUs for embedded applications. Stellarton is the Tunnel Creek core packaged with an Altera FPGA.

Sodaville

Main article: Sodaville

Sodaville is the codename for a series of consumer electronics system on a chip (e.g. set-top box).

Groveland

Main article: Groveland

Groveland is the codename for a series of consumer electronics MPUs (e.g. smart TVs).

All Bonnell Chips