Edit Values
POWER9 µarch
General Info
Arch Type	CPU
Designer	IBM
Manufacturer	GlobalFoundries
Introduction	August, 2017
Phase-out	2020
Process	14 nm
Core Configs	4, 8, 12, 16, 20, 24
Pipeline
Type	Superscalar
OoOE	Yes
Speculative	Yes
Reg Renaming	Yes
Stages	12-16
Instructions
ISA	Power ISA v3.0B
Cache
L1I Cache	32 KiB/core 8-way set associative
L1D Cache	32 KiB/core 8-way set associative
L2 Cache	512 KiB/core duplex 8-way set associative
L3 Cache	10 MiB/core duplex 20-way set associative
Cores
Core Names	Sforza, Monza, LaGrange
Succession
POWER8+ POWER10

POWER9 is IBM's successor to POWER8, a 14 nm microarchitecture for Power-based server microprocessors first introduced in the 2nd half of 2017. POWER9-based processors are branded under the POWER family.

Code names

Codename	Description
Sforza	General-purpose scale-out processors
Monza
LaGrange

Process Technology

POWER9-based microprocessors are fabricated on GlobalFoundries's High-Performance 14 nm (14HP) FinFET Silicon-On-Insulator (SOI) process. The process was designed by IBM at what used to be their East Fishkill, New York fab which has since been sold to GlobalFoundries.

Introduction

IBM introduced the POWER9 scale out variant of POWER in December 2017. Scale up POWER9 processors were introduced in August 2018. The third variant for high I/O will be introduced in 2019.

Compatibility

Initial support for POWER9 started with Linux Kernel 4.8.

Vendor	OS	Version	Notes
IBM	AIX	7.?	Support
	IBM i	?	Support
Linux	Linux	Kernel 4.8	Initial Support
Wind River	VxWorks	VxWorks 7.?	Support

Compiler support

Compiler	CPU	Arch-Favorable
GCC	-mcpu=power9	-mtune=power9
LLVM	-mcpu=power9	-mtune=power9
XL C/C++	-mcpu=pwr9	-mtune=pwr9

Architecture

Key changes from POWER8/+

• 14 nm process (from 22 nm)
  • 17-layer metal stack
  • 8,000,000,000 transistors
• Support for Power ISA v3.0
• Higher single-thread performance
• New highly modular architecture
• Pipeline
  • Shorter pipeline
    • 5 stages eliminated from fetch to compute vs POWER8
    • Roughly 5 stages were also eliminated for fixed-point operations
    • Up to 8 cycles were eliminated for floating-point operations
  • Instruction grouping at dispatch has been removed
  • Improved hazard avoidance / reduced hazard disruption
• Improved branch prediction
• Cache
  • 120 MiB NUCA L3
    • eDRAM
    • 7 TB/s on-chip bandwidth
• Hardware Acceleration
  • PowerAXON
    • Enhanced on-chip acceleration
    • Nvidia NVLink 2.0
    • CAPI 2.0
• I/O Subsystem
  • PCIe Gen4
  • Local SMP - 16 GT/s per lane interface
  • Remote SMP - 25 GT/s per lane interface
    • 48 PCIe lanes
    • IBM's SMP connect for their scale-up systems
    • Also available for the accelerators
• Virtualization
  • QoS assistance
  • New Interrupt architecture
  • Workload-optimized frequency
  • Hardware enforced trusted execution

Block Diagram

This section is empty; you can help add the missing info by editing this page.

Memory Hierarchy

• Cache
  • L1I Cache
    • 32 KiB, 8-way set associative
    • 128-byte lines (broken into four 32-byte sectors)
    • Per SMT4 Core
    • Critical-sector-first reload policy
  • L1D Cache
    • 32 KiB, 8-way set associative
    • 128-byte cache line with support for 64-byte sectors
    • Per SMT4 Core
    • Pseudo-LRU replacement policy
  • L2 Cache
    • 512 KiB 8-way set associative
    • 128-byte line
    • Per core pair
    • Inclusive of L1I/L1D
  • L3 Cache
    • 120 MiB eDRAM
      • 10 MiB/core pair
    • 12 chunks (regions) of 10 MiB 20-way set associative
    • 7 TB/s on-chip bandwidth

Overview

POWER9 succeeds POWER8, introducing many core enhancements as well as large architectural changes. POWER9 has taken a highly modular design approach, with the same design supporting up to 12 cores with 96 threads (SMT8) or up to 24 cores with 96 threads (SMT4). IBM offers POWER9 as both scale up and scale out solutions. In total, there are four targeted chip implementations (24C/SO, 24C/SU, 12C/SO, and 12C/SU).

POWER9 comes in two flavors - scale out (SO) and scale up (SU). The scale out variations are designed for traditional datacenter clusters utilizing single-socket and dual-socket setups. The Scale-Up variations are designed for NUMA servers with four or more sockets, supporting large amounts of memory capacity and throughput.

Scale out

Scale-out overview

For the scale out there are two variations, a 12-core SMT8 model and a 24-core SMT4 model. The SMT4 is optimized for the Linux ecosystem whereas the SMT8 model is said to be optimized for the PowerVM ecosystem (AIX / IBM i customers). Those models support up to 8 channels of DDR4 memory for up to 4 TiB of DDR4-2667 memory (per socket). Those models offer up to 120 GiB/s of sustained bandwidth.

Scale out processors have 48 PowerAXON lines (x48) and come with two SMP links.

Scale up

Scale-up overview

The POWER9 scale up is designed for their enterprise servers and come with two variations, a 12-core SMT8 model and a 24-core SMT4 model. The SMT4 is optimized for Linux Ecosystem whereas the SMT8 is said to be optimized for the PowerVM Ecosystem community (AIX / IBM i customers). POWER9 inherits the same buffered memory architecture first introduced with POWER8. POWER9 has two memory controllers capable of driving four differential memory interface (DMI) channels, each with a maximum signaling rate of 9.6 GT/s for a sustained bandwidth of up to 28.8 GB/s. Each of the DMI channels connects to one dedicated Centaur memory buffer chip which, in turn, provides four DDR4 memory channels running at up to 3200 MT/s as well as 16 MiB of L4 cache. All in all, POWER9 scale-up can use eight buffered memory channels to access up to 32 channels of DDR memory and provides an additional 128 MiB of level 4 cache.

Scale up processors have a different set of I/O interfaces. The two memory controllers drive eight memory-agnostic interfaces, come with four times as many PowerAXON lines (x96), and 3 SMP links.

Slice Design

Execution Slice Microarchitecture is POWER9's entirely new refactored core modular design. The same modules were used to build both the SMT4 and SMT8 cores (and in theory scale further to higher thread count although that's not offered this iteration). These modules allow IBM to address the various processor models with support for the different configurations such as bandwidth/lines (from 128 to 64 byte sectors).

A Slice is the basic 64-bit computing block incorporating a single Vector and Scalar Unit (VSU) coupled with Load/Store Unit (LSU). VSU has a heterogeneous mix of computing capabilities including integer and floating point supporting scalar and vector operations. IBM claims this setup allows for higher utilization of resources while providing efficient exchanges of data between the individual slices. Two slices coupled together make up the Super-Slice, a 128-bit POWER9 physical design building block. Two super-slices together along with an Instruction Fetch Unit (IFU) and an Instruction Sequencing Unit (ISU) form a single POWER9 SMT4 core. The SMT8 variant is effectively two SMT4 units.

POWER8	P9 SMT8 (4x Super-Slice)	P9 SMT4 (2x Super-Slice)	Super-Slice	Slice

Acceleration Platform (POWERAccel)

POWERAccel is the collective name for all the interfaces and acceleration protocols provided by the POWER microarchitecture. POWER9 offers two sets of acceleration attachments: PCIe Gen4 which offers 48 lanes at 192 GiB/s duplex bandwidth and a new 25G link which offers an additional 48 lanes delivering up to 300 GiB/s of duplex bandwidth. On top of the two physical interfaces are a set of open standard protocols that integrated onto those signaling interfaces. The four prominent standards are:

• CAPI 2.0 - POWER9 introduces CAPI 2.0 over PCIe which quadruples the bandwidth offered by the original CAPI protocol offered in POWER8.
• New CAPI - A new interface that runs on top of the POWER9 25G link (300 GiB/s) interface, designed for CPU-Accelerators applications
• NVLink 2.0 - High bandwidth and integration between the GPU and CPU.
• On-Chip Acceleration - An array of accelerators offered by the POWER9 architecture itself
  • 1x GZip
  • 2x 842 Compression
  • 2x AES/SHA

Pipeline

POWER9 modular design allowed IBM to reduce fetch-to-compute latency by 5 cycles. Similar number of cycles were also cut from fixed-point operations from fetch to retire. Additional 8 cycles were cut from fetch-to-retire for floating point instructions. POWER9 furthered increased fusion and reduced the number of instructions cracked (POWER handles complex instructions by 'cracking' them into two or three simple µOPs). Instruction grouping at dispatch that was done in POWER8 has also been entirely removed from POWER9.

B0

B1

RES

IF

IC

D1

D2

Crack/Fuse

PD0

PD1

XFER

MAP

VS0

VS1

F2

F3

F4

F5

LS0

LS1

AGEN

BRD

CA

FMT

CA

SMT4 core

Fetch/Branch	Slices issue VSU & AGEN	VSU Pipe	LSU Slices
32 KiB L1I$ 8 fetch, 6 decode 1x branch execution	4x scalar-64b / 2x vector-128b 4x load/store AGEN	4x ALU 4x FP + FX-MUL + Complex (64b) 2x Permute (128b) 2x Quad Fixed (128b) 2x Fixed Divide (64b) 1x Quad FP & Decimal FP 1x Cryptography	32 KiB L1D$ Up to 4 DW Load or Store

Performance Claims

IBM claims a range of performance improvements for a wide array of workloads. The graph below (provided by IBM) compares POWER9 performance using POWER8 as a baseline. The graph represents a scale-out model of similar specs at a constant frequency.

Die

Scale out

• GlobalFoundries 14 nm FinFET on SOI Process
• 17-layer metal stack
• 8,000,000,000 transistors
  • 15 miles of wire
• 693.37 mm² die size
• 25.228 mm x 27.48416 mm

Scale up

• GlobalFoundries 14 nm FinFET on SOI Process
• 17-layer metal stack
• 8,000,000,000 transistors
  • 15 miles of wire
• 693.37 mm² die size
• 25.228 mm x 27.48416 mm

All POWER9 Processors

	List of POWER9-based Processors
Model	Launched	Codename	Cores	Threads	L2$	L3$	TDP	Frequency	Turbo
02CY296	November 2017	Sforza	22	88	5.5 MiB 5,632 KiB 5,767,168 B 0.00537 GiB	110 MiB 112,640 KiB 115,343,360 B 0.107 GiB	190 W 190,000 mW 0.255 hp 0.19 kW	2.75 GHz 2,750 MHz 2,750,000 kHz	3.8 GHz 3,800 MHz 3,800,000 kHz
02CY227	November 2017	Sforza	22	88	5.5 MiB 5,632 KiB 5,767,168 B 0.00537 GiB	110 MiB 112,640 KiB 115,343,360 B 0.107 GiB	190 W 190,000 mW 0.255 hp 0.19 kW	2.6 GHz 2,600 MHz 2,600,000 kHz	3.8 GHz 3,800 MHz 3,800,000 kHz
02CY414	November 2017	Sforza	22	88	5.5 MiB 5,632 KiB 5,767,168 B 0.00537 GiB	110 MiB 112,640 KiB 115,343,360 B 0.107 GiB	160 W 160,000 mW 0.215 hp 0.16 kW	2.25 GHz 2,250 MHz 2,250,000 kHz	3.8 GHz 3,800 MHz 3,800,000 kHz
02CY415	November 2017	Sforza	20	80	5 MiB 5,120 KiB 5,242,880 B 0.00488 GiB	100 MiB 102,400 KiB 104,857,600 B 0.0977 GiB	160 W 160,000 mW 0.215 hp 0.16 kW	2.4 GHz 2,400 MHz 2,400,000 kHz	3.8 GHz 3,800 MHz 3,800,000 kHz
02CY228	November 2017	Sforza	20	80	5 MiB 5,120 KiB 5,242,880 B 0.00488 GiB	100 MiB 102,400 KiB 104,857,600 B 0.0977 GiB	190 W 190,000 mW 0.255 hp 0.19 kW	2.7 GHz 2,700 MHz 2,700,000 kHz	3.8 GHz 3,800 MHz 3,800,000 kHz
02CY489	November 2017	Sforza	18	72	4.5 MiB 4,608 KiB 4,718,592 B 0.00439 GiB	90 MiB 92,160 KiB 94,371,840 B 0.0879 GiB	190 W 190,000 mW 0.255 hp 0.19 kW	2.8 GHz 2,800 MHz 2,800,000 kHz	3.8 GHz 3,800 MHz 3,800,000 kHz
02CY416	November 2017	Sforza	18	72	4.5 MiB 4,608 KiB 4,718,592 B 0.00439 GiB	90 MiB 92,160 KiB 94,371,840 B 0.0879 GiB	130 W 130,000 mW 0.174 hp 0.13 kW	2.25 GHz 2,250 MHz 2,250,000 kHz	3.8 GHz 3,800 MHz 3,800,000 kHz
02CY230	November 2017	Sforza	16	64	4 MiB 4,096 KiB 4,194,304 B 0.00391 GiB	80 MiB 81,920 KiB 83,886,080 B 0.0781 GiB	190 W 190,000 mW 0.255 hp 0.19 kW	2.9 GHz 2,900 MHz 2,900,000 kHz	3.8 GHz 3,800 MHz 3,800,000 kHz
02AA986	November 2017	Sforza	16	64	4 MiB 4,096 KiB 4,194,304 B 0.00391 GiB	80 MiB 81,920 KiB 83,886,080 B 0.0781 GiB	190 W 190,000 mW 0.255 hp 0.19 kW	2.9 GHz 2,900 MHz 2,900,000 kHz	3.8 GHz 3,800 MHz 3,800,000 kHz
02CY417	November 2017	Sforza	16	64	4 MiB 4,096 KiB 4,194,304 B 0.00391 GiB	80 MiB 81,920 KiB 83,886,080 B 0.0781 GiB	130 W 130,000 mW 0.174 hp 0.13 kW	2.3 GHz 2,300 MHz 2,300,000 kHz	3.8 GHz 3,800 MHz 3,800,000 kHz
02CY771	November 2017	Sforza	12	48	3 MiB 3,072 KiB 3,145,728 B 0.00293 GiB	60 MiB 61,440 KiB 62,914,560 B 0.0586 GiB	105 W 105,000 mW 0.141 hp 0.105 kW	2.2 GHz 2,200 MHz 2,200,000 kHz	3.8 GHz 3,800 MHz 3,800,000 kHz
02CY089	November 2017	Sforza	8	32	4 MiB 4,096 KiB 4,194,304 B 0.00391 GiB	80 MiB 81,920 KiB 83,886,080 B 0.0781 GiB	160 W 160,000 mW 0.215 hp 0.16 kW	3.5 GHz 3,500 MHz 3,500,000 kHz	3.8 GHz 3,800 MHz 3,800,000 kHz
02CY297	November 2017	Sforza	4	16	2 MiB 2,048 KiB 2,097,152 B 0.00195 GiB	40 MiB 40,960 KiB 41,943,040 B 0.0391 GiB	90 W 90,000 mW 0.121 hp 0.09 kW	3.2 GHz 3,200 MHz 3,200,000 kHz	3.8 GHz 3,800 MHz 3,800,000 kHz
Count: 13

Bibliography

• Template:hcbib
• Template:hcbib

See also

• Intel's Skylake & Cascade Lake
• AMD's Zen
• Qualcomm's Falkor