PEZY-SCx
Developer	PEZY Computing
Manufacturer	TSMC
Type	Microprocessors
Introduction	2014 (announced) 2014 (launch)
Architecture	Many-core architecture
Process	28 nm 0.028 μm 2.8e-5 mm , 16 nm 0.016 μm 1.6e-5 mm , 7 nm 0.007 μm 7.0e-6 mm , 5 nm 0.005 μm 5.0e-6 mm
Technology	CMOS
Clock	733 MHz-1,600 MHz

PEZY-SCx (PEZY-SuperComputerx) is a family of many-core microprocessors designed by PEZY. Those processors power many of Japan's most efficient supercomputers.

Overview

PEZY-SCx is a family of high-performance, low-power many-core microprocessors designed by PEZY for a series of supercomputer developed in Japan. PEZY collaborates closely with ExaScaler, a company that provides immersion cooling systems. Together, they have developed a series of supercomputers called ZettaScaler.

Architecture

The basic architecture of all the PEZY-SCx chips is fairly similar. At the heart is the Processing Element. Depending on the model, 1000s of those PEs are then integrated on a single die.

Processing Element (PE)

The cores are called the processing elements (PE). The PEs are designed to be very simple RISC cores that support MIMD. Each PE is a 16-stage in-order superscalar capable of issuing two instructions per cycle with out-of-order completion whenever possible supporting 8-way fine-grain simultaneous multithreading. A processing element supports 8-way SMT with dedicated register files for each thread. Threads are are interleaved each cycle with switching done to reduce forwarding and branch prediction. Explicit switching of active threads is also done in order to hide high latency operations.

The instruction set architecture implemented is a proprietary one designed by PEZY. The PEs do not maintain cache-coherency and there is no per-PE data cache. Complex instructions are processed by the Special Function Units (SFU) located in each city. A fair amount of sacrifices were made in order to ensure the cores remain small enough so that a large amount of them can be packed into a small area.

Village & City

For every pair of PEs is 2 KiB of level 1 data cache. Each City is made of 64 KiB of L2 cache, a number of special function units, and 4 smaller blocks called "Villages". A village consists of four processing elements. Each city also contains a Special Function Unit (SFU) which is used to execute complex instructions.

Models

1st generation

Main article: PEZY-SC

The first series of supercomputers, ZettaScaler-1.x, were based on the PEZY-SC. The PEZY-SC featured four "Prefecture", each consisting of 16 cities for a total of 256 PEs per Prefecture along with 2 MiB of L3 cache. This chip had four such Prefecture units for a total of 1,024 cores.

2nd generation

Main article: PEZY-SC2

The first series of supercomputers, ZettaScaler-2.x, were based on the PEZY-SC2.

future generations

PEZY has laid out future generations based on TSMC's 7nm and 5nm processes.

Summary

	List of PEZY-SCx Processors
Model	Process	Launched	Cores	Threads	Die	Frequency
PEZY-SC4	5 nm 0.005 μm 5.0e-6 mm	2020	16,384	131,072	740 mm² 1.147 in² 7.4 cm² 740,000,000 µm²	1,600 MHz 1.6 GHz 1,600,000 kHz
PEZY-SC3	7 nm 0.007 μm 7.0e-6 mm	2019	8,192	65,536	700 mm² 1.085 in² 7 cm² 700,000,000 µm²	1,333.333 MHz 1.333 GHz 1,333,333 kHz
PEZY-SC2	16 nm 0.016 μm 1.6e-5 mm	2017	2,048	16,384	620 mm² 0.961 in² 6.2 cm² 620,000,000 µm²	1,000 MHz 1 GHz 1,000,000 kHz
PEZY-SC	28 nm 0.028 μm 2.8e-5 mm	September 2014	1,024	8,192	411.6 mm² 0.638 in² 4.116 cm² 411,600,000 µm²	733.33 MHz 0.733 GHz 733,330 kHz
PEZY-SCnp	28 nm 0.028 μm 2.8e-5 mm	6 May 2016	1,024	8,192		766.66 MHz 0.767 GHz 766,660 kHz
Count: 5

See also

• Intel Xeon Phi