QorIQ
Developer	Freescale, NXP
Manufacturer	IBM, TSMC
Type	System on Chips
Introduction	June 16, 2008 (announced) June 16, 2008 (launch)
Architecture	POWER & ARM Communication SoC
Word size	32 bit 4 octets 8 nibbles , 64 bit 8 octets 16 nibbles
Process	45 nm 0.045 μm 4.5e-5 mm , 32 nm 0.032 μm 3.2e-5 mm , 20 nm 0.02 μm 2.0e-5 mm , 16 nm 0.016 μm 1.6e-5 mm
Technology	CMOS
Clock	533 MHz-2,000 MHz
Succession
←
PowerQUICC

QorIQ (pronounced "Core IQ") is a family of ARM and POWER embedded and networking microprocessors designed and sold by NXP (formerly Freescale) since 2008 as a successor to the PowerQUICC family.

Overview

Introduced in 2008 by Freescale as a successor to the PowerQUICC family, then one of industry's most popular communications processors. Like the PowerQUICC brand, QorIQ spanned the entire range of products from low-power and low-cost to large multi-core designs. Original designs were based on the POWER architecture. In 2012 Freescale announced the Layerscape series that adopts the ARM architecture which Freescale/NXP has been using since.

Power

This section requires expansion; you can help adding the missing info.

Identification

Only applies to original QorIQ P & T series:

Identification
QorIQ		P	4	08	0
QorIQ		P	1	01	3
						Iteration/Version
					Core Count 01 single-core 02 dual-core 04 quad-core 08 octa-core
				Platform Level
			Technology Node P 45 nm process T 28 nm process
	Brand Name QorIQ

P Series

Announced in mid-2008, the QorIQ P-series are POWER-based microprocessors based on the e500 microarchitecture. Being the first Freescale multicore networking applications based on the 45 nm process, those parts offered a migration path for PowerQUICC II Pro and PowerQUICC III processor customers. All chips are fully software compatible with each other and existing PowerQUICC processors with multi-core parts supporting both symmetric and asymmetric multiprocessing.

P1

The P1 series are designed for low-power fan-less design designed to succeed previous models (e.g., PowerQUICC II Pro) with higher performance at the same power envelope. All models exhibit a peak power consumption of sub 5 W. P1 parts are designed for the applications such as Ethernet switch controllers, gateways, wireless LAN access points, network printing/storage, and other networking devices with tight thermal constraints.

	List of QorIQ P1 Processors
Model	Launched	Cores	Core	Frequency	L2$	Max Power	Package
P1010	2009	1	e500 v2	667 MHz 0.667 GHz 667,000 kHz , 800 MHz 0.8 GHz 800,000 kHz		1.6 W 1,600 mW 0.00215 hp 0.0016 kW	TE-PBGA-II-689, TE-PBGA-425
P1011	2009	1	e500 v2	800 MHz 0.8 GHz 800,000 kHz	256 KiB 0.25 MiB 262,144 B 2.441406e-4 GiB	1.56 W 1,560 mW 0.00209 hp 0.00156 kW	TE-PBGA-II-689
P1012	January 2010	1	e500 v2	533 MHz 0.533 GHz 533,000 kHz , 800 MHz 0.8 GHz 800,000 kHz	256 KiB 0.25 MiB 262,144 B 2.441406e-4 GiB	1.6 W 1,600 mW 0.00215 hp 0.0016 kW	TE-PBGA-II-689
P1013	2010	1	e500 v2	1,067 MHz 1.067 GHz 1,067,000 kHz	256 KiB 0.25 MiB 262,144 B 2.441406e-4 GiB	3 W 3,000 mW 0.00402 hp 0.003 kW	TE-PBGA-II-689
P1014	2011	1	e500 v2	800 MHz 0.8 GHz 800,000 kHz	256 KiB 0.25 MiB 262,144 B 2.441406e-4 GiB	1.13 W 1,130 mW 0.00152 hp 0.00113 kW	TE-PBGA-II-689, TE-PBGA-425
P1015	2012	1	e500 v2	400 MHz 0.4 GHz 400,000 kHz , 533 MHz 0.533 GHz 533,000 kHz	256 KiB 0.25 MiB 262,144 B 2.441406e-4 GiB	1.4 W 1,400 mW 0.00188 hp 0.0014 kW	TE-PBGA-561
P1016		1	e500 v2			1.53 W 1,530 mW 0.00205 hp 0.00153 kW	TE-PBGA-561
P1017		1	e500 v2			2 W 2,000 mW 0.00268 hp 0.002 kW	TE-PBGA-457
P1020	2009	2	e500 v2	800 MHz 0.8 GHz 800,000 kHz	256 KiB 0.25 MiB 262,144 B 2.441406e-4 GiB	1.89 W 1,890 mW 0.00253 hp 0.00189 kW	TE-PBGA-II-689
P1021	January 2010	2	e500 v2	1,200 MHz 1.2 GHz 1,200,000 kHz	256 KiB 0.25 MiB 262,144 B 2.441406e-4 GiB	4.5 W 4,500 mW 0.00603 hp 0.0045 kW	TE-PBGA-II-689
P1022	2010	2	e500 v2	1,067 MHz 1.067 GHz 1,067,000 kHz	256 KiB 0.25 MiB 262,144 B 2.441406e-4 GiB	2.5 W 2,500 mW 0.00335 hp 0.0025 kW	TE-PBGA-II-689
P1023		2	e500 v2			2 W 2,000 mW 0.00268 hp 0.002 kW	TE-PBGA-457
P1024	2012	2	e500 v2	533 MHz 0.533 GHz 533,000 kHz	256 KiB 0.25 MiB 262,144 B 2.441406e-4 GiB	1.6 W 1,600 mW 0.00215 hp 0.0016 kW	TE-PBGA-561
P1025		2	e500 v2			1.69 W 1,690 mW 0.00227 hp 0.00169 kW	TE-PBGA-561
Count: 14

P2

The P2 series are designed to succeed the PowerQUICC III parts. These parts feature a large cache that may be configured as stashing memory, four Ethernet controllers with QoS features and flow control, DDR2/DDR3 SDRAM Controller with ECC support, four general purpose SerDes lanes that may be configured as either two Serial RapidIO ports, three PCI Express ports and two SGMII ports.

	List of QorIQ P2 Processors
Model	Launched	Cores	Core	Frequency	L2$	Max Power
P2010	2009	1	e500 v2	1,200 MHz 1.2 GHz 1,200,000 kHz 800 MHz 0.8 GHz 800,000 kHz 1,000 MHz 1 GHz 1,000,000 kHz 1,333 MHz 1.333 GHz 1,333,000 kHz	512 KiB 0.5 MiB 524,288 B 4.882812e-4 GiB	6.7 W 6,700 mW 0.00898 hp 0.0067 kW
P2020	2009	2	e500 v2	800 MHz 0.8 GHz 800,000 kHz 1,200 MHz 1.2 GHz 1,200,000 kHz 1,333 MHz 1.333 GHz 1,333,000 kHz	512 KiB 0.5 MiB 524,288 B 4.882812e-4 GiB	8 W 8,000 mW 0.0107 hp 0.008 kW
Count: 2

ARM

This section is empty; you can help add the missing info by editing this page.

See also

• Cavium ThunderX
• Intel Atom