Edit Values
Loihi
General Info
Designer	Intel
Manufacturer	Intel
Market	Artificial Intelligence
Introduction	September 25, 2017 (announced) January, 2018 (launched)
Shop	Amazon
Microarchitecture
Process	14 nm
Transistors	2,070,000,000
Technology	CMOS
Die	60 mm²
Multiprocessing
Max SMP	16,384-Way (Multiprocessor)
Vcore	0.50 V-1.25 V

Loihi (pronounced low-ee-hee) is a neuromorphic research test chip designed by Intel Labs that uses an asynchronous spiking neural network (SNN) to implement adaptive self-modifying event-driven fine-grained parallel computations used to implement learning and inference with high efficiency. The chip is a 128-neuromorphic cores many-core IC fabricated on Intel's 14 nm process.

The chip is named after the Loihi as a play-on-words - Loihi is an emerging Hawaiian submarine volcano that is set to surface one day.

Overview

Announced in September 2017, Loihi is predominantly a research chip meaning performance characteristics are not guaranteed. Loihi consists of a asynchronous spiking neural network (SNN) meaning instead of manipulating signals, the chip sends spikes along activate synapses. Connections are asynchronous and highly timed based. Neuromorphic cores containing many neurons are interlinked and receive spikes from elsewhere in the network. When received spikes accumulate for a certain period of time and reach a set threshold, the core will fire off its own spikes to its connected neurons. Preceding spikes reinforce each other and the neuron connections while spikes that follows will inhibit the connection, declining the connectivity until all activities are halted.

The chip was initially tested and simulated using FPGAs. Actual silicon implementations arrived in late November. Loihi is fabricated on Intel's 14 nm process and has a total of 130,000 artificial neurons and 130 million synapses. In addition to the 128 neuromorphic cores, there are 3 managing Lakemont cores.

Architecture

The chip consists of a many-core mesh of 128 neuromorphic cores, three Lakemont x86 cores (Quark), and an off-chip communication interface that allows the chip to scale out to many other chips in the four planar directions (as shown on the right). The implemented mesh protocol supports up to 4,096 on-chip cores and up to 16,384 chips.

The chip itself implements of a fully asynchronous many-core mesh of 128 neuromorphic cores. It implements a spiking neural network (SNN) whereby at any given time one or more of the implemented neurons may send out an impulse (i.e., spike) to its neighbors though the directed links (synapses). All neurons have a local state with their own set of rules that affects their evolution and the timing of spike generation. Interaction is entirely asynchronous, sporadic, and independent of any other neuron on the network. Core-to-core communication is done in using packetized messages with write, read request, and read response messages for core management and x86-to-x86 messaging, spike messages, and barrier messages (for synchronization).

Neuromorphic Core

Loihi implements 128 neuromorphic cores, each containing 1,024 primitive spiking neural units grouped into tree-like structures in order to simplify the implementation. Each of those groups share the same fan-in and fan-out connections, configuration, and state variables in ten architectural memories.

Loihi implements a variant of the current-based synapse (CUBA) leaky integrate-and-fire neuron model with two internal state variables:

• Synaptic response current - the weighted sum of the input spikes and a constant bias
• Membrane potential - a leaky (i.e. weakens over time) spike potential function that sends out a spike when the potential passes the firing threshold

It's worth noting that since Loihi is a digital architecture, the above continuous functions are approximated using a discrete timestep whereby all neurons maintain a timestemp synchronized throughout the entire chip. This is needed in order to enable well-defined behaviors.

Above is the block diagram of the neuromorphic core's major memory blocks where the various connectivities, configurations, and dynamic states of all the neurons that are mapped to the neuromorphic core. Each core incorporates a total of 2 Mib (including ECC). Spikes are received on the input side, handled internally (synaptic/group update), and a spike is optionally generated in the output if the various conditions are met. For the most part those blocks operate independently with little control synchronization. Intel has parallelized the hardware where a single large event can be handled more efficiently as a few smaller events. This is shown as a dotted line. One example Intel provided is extracting synapses from the memory and to the dendrite accumulator through the modification and even the learning engine is with up to four-way parallelism.

The block at the bottom is the configurable learning engine.

Operation and Communication

The operation itself is fairly straightforward, once enough spikes accumulate and exceed the predefined threshold level, a spike message is created and sent out to various other groups in various destination cores. Loihi is actually the first neuromorphic chip to feature a fully integrated SNN meaning it can support unicast, multicast, broadcast, sparse network, variable synaptic formats (any weight precision 1-9 bits, +/-, etc..), and population-based hierarchical connectivity.

Communication is done by each of the cores independently iterating over each of their neuron groups and for every group that enters a firing state, the core generates a spike message that is distributed to all the other cores on the mesh that contain their synaptic fanouts. The iterations of all the groups by all the cores must be done within the same discrete timestamp. To ensure that all the spikes have made it to their destinations before the operation is repeated, Loihi sends out a synchronization message whereby any spikes in-flight are flushed in the first phase and in the second phase a timestep-advance notification is sent to all the cores to advance their timestamp to , enabling them to proceed to update their internal groups.

It should be noted that Loihi supports a hierarchical network model which means it can exploits the localized sub-networks in the mesh in order to substantially reduce the chip-wide connectivity and synaptic resources required to map the networks.

Self-learning

Each core also contains a "learning engine" (marked in the block diagram above as 'learning') that can be programmed to adopt to the network parameters during operation such as the spike timings and their impact. IT does this by updating the synaptic weights using the microcode-programmed learning rules. This makes the chip more flexible as it allows various paradigms such as supervisor/non-supervisor and reinforcing/reconfigurablity without requiring any particular approach. The choice for higher flexibility is intentional in order to defer various architectural decisions that could be detrimental to research.

Die

Floorplan

• 14 nm process
• 2,070,000,000 transistors
  • 128 neuromorphic cores + 3 x86 cores
• 60 mm² die size

Test board

Thought Intel didn't specify, the test board appears to feature four Loihi chips meaning the board has 512 neuromorphic cores and 524,288 neurons, all are fully integrated over the mesh.

References

• Jim Held, Intel Fellow & Director Emerging Technologies Research, Intel Labs, HPC Developer Conference 2017 ("Leading The Evolution of Compute: Neuromorphic and Quantum Computing").
• Davies, Mike, et al. "Loihi: A Neuromorphic Manycore Processor with On-Chip Learning." IEEE Micro (2018).

See also

• TrueNorth