Revision as of 02:27, 11 January 2014

This article is still a stub and needs your attention. You can help improve this article by editing this page and adding the missing information.

Rockwell PPS-4 Developer Rockwell International Introduction date 3Q, 1972 Model 10660 12660 Clock 256 kHz Bus Width 4-bit Memory Specs Max Memory 2KB Addressable 4KB I/O Specs General Purpose IO 31 ports[1] Packaging Package 42-pin QUIL[1]

The Rockwell PPS-4 (aka PPS-4/1) was a 4-bit microprocessor designed by Rockwell International and first produced at the 3rd quarter of 1972.^[1] The chip came in a 42-pin quadruple in-line package and was fabricated using metal gate technology as opposed to the Intel 4004 which used silicon gate technology. The PPS-4 was one of a handful of microprocessors introduced before 1975.^[2][3] Various Gottlieb's pinball machines use the PPS-4.^[3] Unlike the Intel 4004, the PPS-4 was produced and sold throughout the 1980s. Rockwell released a second generation version of the PPS-2 called PPS-4/2 in 1975.

System

Similarly to the Intel 4004, the Rockwell PPS-4 required two additional support chips: a clock generator and ROM memory. The chip came in a 42-pin QIP package. 12 I/O terminals are available for general purpose I/O.

Versions

The PPS-4 came in two versions: 10660 and the 12660. The difference between the two is unclear.

Instruction set

The PPS-40 came with a relatively large set of instruction.

References