From WikiChip
Difference between revisions of "risc-v/registers"
< risc-v

(Overview)
Line 11: Line 11:
  
 
:[[File:risc-v base integer regsiters.svg|500px]]
 
:[[File:risc-v base integer regsiters.svg|500px]]
 +
 +
== Calling convention ==
 +
In conventional RISC-V software, the stack grows downward with the stack pointer always being 16-byte aligned.
 +
 +
{| class="wikitable"
 +
|-
 +
! Register !! Description !! Owner
 +
|-
 +
| x0 || [[zero register|hardwired zero]] || -
 +
|-
 +
| x1 || return address || Caller
 +
|-
 +
| x2 || stack pointer || Callee
 +
|-
 +
| x3 || global pointer || -
 +
|-
 +
| x4 || thread pointer || -
 +
|-
 +
| x5-7 || temporary registers || Caller
 +
|-
 +
| x8 || saved register / frame pointer || Callee
 +
|-
 +
| x9 || saved register || Callee
 +
|-
 +
| x10-11 || function arguments / return values || Caller
 +
|-
 +
| x12-17 || function arguments || Caller
 +
|-
 +
| x18-27 || saved registers || Callee
 +
|-
 +
| x28-31 || temporary registers || Caller
 +
|}

Revision as of 03:20, 12 December 2017

RISC-V
Instruction Set Architecture
General
Base Variants(base)
Standard Extensions(all)
Topics

v · d · e

RISC-V defines a set of registers that are part of the core ISA.

Overview

RISC-V base ISA consists of 32 general-purpose registers x1-x31 which hold integer values. The register x0 is hardwired to the constant 0. There is an additional user-visible program counter pc register which holds the address of the current instruction. RISC-V does not define a specific subroutine return address link register, but it does suggest that the standard software calling convention should use register x1 to store the return address on a call.

The width of those registers are defined by the RISC-V base variant used. That is, for RV32, the registers are 32 bits wide, for RV64, they are 64 bits, and for RV128, those registers are 128 bit wide.

Note that RISC-V defines a special ISA E for resource-constrained embedded applications which only defines 16 registers.


risc-v base integer regsiters.svg

Calling convention

In conventional RISC-V software, the stack grows downward with the stack pointer always being 16-byte aligned.

Register Description Owner
x0 hardwired zero -
x1 return address Caller
x2 stack pointer Callee
x3 global pointer -
x4 thread pointer -
x5-7 temporary registers Caller
x8 saved register / frame pointer Callee
x9 saved register Callee
x10-11 function arguments / return values Caller
x12-17 function arguments Caller
x18-27 saved registers Callee
x28-31 temporary registers Caller