Not to be confused with micro-operation fusion.

Macro-Operation Fusion (Macro-Op Fusion or MOP Fusion) is a hardware optimization technique found in Intel's x86 microarchitectures whereby a pair of macro-operations are merged into a single macro-operation.

History

The technique for fusing instructions is owned by Intel under Patent US6675376 ("System and method for fusing instructions") originally filed in December 2000. MOP Fusion was first introduced in the Core microarchitecture and has been featured in every Intel microarch since.

Motivation

A fused instruction remains fused throughout its lifetime. Therefore fused instructions can represent more work with less bits, free up execution units, tracking information (e.g. in the rename unit), save pipeline bandwidth in all stages from decode to retire, and consequently save power. Note that this is done before decoding, therefore even decoding bandwidth is save.

Conditional branching are a very common operation in almost all workloads. Macro-op fusion also helps workloads that are not compiled such as in the case of many interpreted programming languages (e.g. PHP, the software running WikiChip). In those programs, conditional branching is seldomly fused as they would by a static compiler.

Mechanism

After the boundaries of macro-ops are found and marked, they are delivered to the instruction queue before being fed to the decoders. At that stage of the pipeline, macro-operation fusion opportunities can be identified and exploited.

A pair of two dependent instructions are first compared against a set of criteria. For example, if the second instruction is commutative (i.e., the order of operands does not affect the result) or if the destination of the operand of the first instruction is used as the source operand of the second instruction than the instruction may qualify for fusion. Additionally either the first source or destination operand must be a register and the second source operand (if one exists) must be an immediate value or a non-RIP-relative memory. Fusion replaces the two instructions with a single instruction representing both operations behaviorally.

Fusion is done on compare (CMP) and test (TEST) instruction with a subsequent conditional jump instruction. The produced output is a single single compare-and-branch instruction. The final fused instruction remains as such for its remaining lifetime; that is the fused instruction will stay fused throughout the pipeline and execute on a single port in the back-end that can handle both operations.