Semiconductor & Computer Engineering
- On events
- Access levels
- Raw Events
- Ctcp Events
Access levels in mIRC are a mechanism by which events can be restricted to certain user levels or named groups. Almost all events have a level parameter that specifies the event's access level.
Contents
User list
The list of users and their access is stored in the "users" tab of the script editor. Only a single address is stored per line and must follow the following syntax:
<levels>:<address> <additional info>
Access levels are comma-delimited values that define the levels of the user. Although usually, the levels are numeric, you can use a name instead like "botAdmin" or "friends".
The <additional info> parameter is an optional parameter that can be used to store some additional information about the user or other useful miscellaneous data.
10,20:some!one@example.com friend:dan!z@some.isp.net high school friend
Adding users
There are two commands that can be used to add a user to the access list, /auser and /guser. They follow this syntax:
/auser [-a] <levels> <name|address> [info] /guser [-a] <levels> <name> [addressType] [info]
Both /auser and /guser do the same thing, they add a specific user to the user list with the access levels specified (Comma delimited). The -a switch can be used to simply add additional access levels to an existing user, otherwise all the old levels gets replaced with the new ones. The fundamental difference between /auser and /guser is that /guser can be used to look up the address of a user while /auser requires you to provide it beforehand.
;Add joe (address mask type 2), access level 'friend' /guser friend joe 2 neighbor
Removing users
The /ruser command can be used to remove a user completely from the access list or simply remove one of his levels.
/ruser [levels] <name|address> [type]
For example:
/ruser madman 2 /ruser 2,10 foobar
Changing users' info
The user info parameter can be changed at any time using the /iuser command:
/iuser <name|address> [info]
Event prefixes
mIRC offers a lot of prefixes to slightly alter how the event activates.
* prefix
The * prefix is the most commonly used prefix, and allows any user to activate the event regardless of their access level.
For example:
on *:text:!time:#:{ notice $nick the time for me is $time }
Numeric prefixes
Numeric prefixes allow any user with an access level >= the prefix to activate the event.
For example:
on +5:text:.h:#myChan:{ mode $chan +h $nick }
can be executed by any user with access level 5 or greater.
^ prefix
By default, your event are triggered after mIRC has processed this event itself. For example if someone talks to you in a query, mIRC will display the text in that window, triggers the various beep and flash option if any, and only then trigger on text.
The ^ prefix tells mIRC to process your event before it processes the event itself. This prefix typically only works work IRC event but here is a full list of supported events: on ACTION, on BAN, on CHAT, on DEHELP, on DEOP, on DEVOICE, on HELP, on INVITE, on JOIN, on KICK, on MODE, on NICK, on NOTICE, on OP, on OPEN, on PART, on PING, on TEXT, on UNBAN, on USERMODE, on VOICE, on QUIT, on SERV, on SERVERMODE, on SERVEROP, on SNOTICE, on TABCOMP, on TOPIC, on WALLOPS.
This prefix, coupled with /halt or /haltdef, allows you to display your own message for a given event, or it allows you to prevent a query window from opening with on open, or to prevent a nick completion in on tabcomp
+ prefix
By default, the numeric prefix means that level and any level higher can trigger that event. Using the + prefix, you can limit the event to be exactly the level specified.
For example:
on +5:text:.h:#myChan:{ mode $chan +h $nick }
will only work for users with access level of exactly 5. Any user with higher access level will not activate that event.
! prefix
The exclamation mark prefix can be used to prevent an event from being activated by you (if ($nick != $me)).
For example:
on !1:join:#support:{ msg $chan Hello $nick $+ , do you need help? }
will never get activated by you joining #support, only other people.
@ prefix
The @ symbol can be used as a prefix to indicate that the event can only be activated if you are an operator in the channel. You can think of it as "if ($me isop $chan) {"
For example:
on @10:text:.op:#myChan:{ mode $chan +o-v $nick $nick }
will only work if you are an operator in #myChan at the time the user typed ".o".
& prefix
The & prefix can be used to prevent the event from being executed if the previous event called the /haltdef or /halt commands (if $halted is $true).
For example, given the following two on TEXT events placed in separate files...
script1.mrc
on *:TEXT:!test:?:haltdef
script2.mrc
on &*:TEXT:*:?:echo -ga I triggered because $!halted == $halted $+ !
The second event will trigger upon recieving any msg sent via query except !test, because the first event calls the haltdef command upon receiving !test.
$ prefix
This event prefix means the matchtext of the event is a regular expression, the delimiter are required.
on $*:text:/^([!@.])test$/:#myChan:{ msg $chan $nick triggered test with $regml(1) }
Named access levels
Sometimes it's beneficial to give an access group a name instead of a numeric value. A good example is bot admins, friends, or even channel members. You can define such groups using the normal /guser and /auser commands:
/guser BotAdmin Mike123 2 /guser BotAdmin Joe73 2 /guser BotAdmin Dave12 2
With that you can use the named group level in events, for example:
on BotAdmin:text:!example:#:{ msg $chan Hello Bot Admin! }
me prefix
The 'me' prefix can be used to get an event to trigger when you meet the criteria (only if $nick == $me). The 'me' prefix is a bit special; it requires a new colon before others prefixes.
For example:
on me:*:join:#support:{ msg $chan Hello $chan $+ , I need help! }
Note: Many events are not triggered when you meet the criteria and you need to code a separate 'me' event to handle it.