Revision as of 13:23, 15 April 2017

Template:mpu Atom 230 is an ultra-low power 64-bit x86 single-core microprocessor introduced by Intel in mid-2008. The 230 is specifically designed for nettops and various other mobile internet connected devices. This processors, which was fabricated on Intel's 45 nm process, was based on the Bonnell microarchitecture. The Atom 230 operates at 1.6 GHz with a TDP of 4 W operating over a QDR FSB operating at 533 MT/s.

Cache

Main article: Bonnell § Cache

[Edit/Modify Cache Info]

Cache Organization Cache is a hardware component containing a relatively small and extremely fast memory designed to speed up the performance of a CPU by preparing ahead of time the data it needs to read from a relatively slower medium such as main memory. The organization and amount of cache can have a large impact on the performance, power consumption, die size, and consequently cost of the IC. Cache is specified by its size, number of sets, associativity, block size, sub-block size, and fetch and write-back policies. Note: All units are in kibibytes and mebibytes.

L1$ 56 KiB 57,344 B 0.0547 MiB L1I$ 32 KiB 32,768 B 0.0313 MiB 1x32 KiB 8-way set associative   L1D$ 24 KiB 24,576 B 0.0234 MiB 1x24 KiB 6-way set associative write-back L2$ 512 KiB 0.5 MiB 524,288 B 4.882812e-4 GiB     1x512 KiB 8-way set associative

Memory controller

This processor has no integrated memory controller.

Graphics

This processor has no integrated graphics.

Features

[Edit/Modify Supported Features]

	Supported x86 Extensions & Processor Features
	MMX MMX Extension EMMX Extended MMX Extension SSE Streaming SIMD Extensions SSE2 Streaming SIMD Extensions 2 SSE3 Streaming SIMD Extensions 3 SSSE3 Supplemental SSE3 x86-16 16-bit x86 x86-32 32-bit x86 x86-64 64-bit x86 Real Real Mode Protected Protected Mode SMM System Management Mode FPU Integrated x87 FPU NX No-eXecute HT Hyper-Threading

Documents

Datasheets

• Atom 230 Datasheet, April 2010

Other

• Atom 200 Series Specification Update, April 2010
• Atom 200 Series Thermal and Mechanical Design Guidelines, June 2008