Editing acorn/microarchitectures/arm3

{{acorn title|ARM3|arch}}
{{microarchitecture
|atype=CPU
|name=ARM3
|designer=Acorn Computers
|manufacturer=VLSI Technology
|manufacturer 2=Sanyo
|introduction=1989
|process=1.5 µm
|cores=1
|type=Scalar
|type 2=Pipelined
|stages=3
|decode=1-way
|isa=ARMv2a
|l1=4 KiB
|l1 per=core
|l1 desc=64-way set associative
|core name=ARM3
|core name 2=ARM250
|predecessor=ARM2
|predecessor link=acorn/microarchitectures/arm2
|successor=ARM6
|successor link=arm holdings/microarchitectures/arm6
|successor 2=ARM250
|successor 2 link=arm holdings/microarchitectures/arm250
}}
'''ARM3''' is the second-generation commercial [[ARM]] implementation designed by [[Acorn Computers]] as a successor to the {{\\|ARM2}}.

== History ==
{{see also|arm/history|l1=ARM's History}}
The ARM3 builds on the success of the {{\\|ARM2}} with higher performance through the introduction of on-die cache but without any major changes to the core itself. The ARM3 was designed by a team of four engineers in nine months and was introduced in [[1989]]. The ARM3 initially appeared with a 25 MHz crystal, In the Acorn A5000, with a peak performance of 25 MIPS and a sustainable performance of 12.72 MIPS. Later Acorn A540 and A5000 were supplied with ARM3 clocked the chip at 33MHz, with 3rd parties supplying chips clocked at 36 MHZ, to upgrade earlier ARM2 machines, from a sustained 4.85 to 17.44 MIPS.

== Process Technology ==
{{see also|1.5 µm process}}
The ARM3 was implemented on a [[1.5 µm]] double-level metal (DLM) [[CMOS]] process.

== Architecture ==
The major goal of the ARM3 was to improve performance. A target of three times the performance of the {{\\|ARM2}} was set. In order to support a faster microprocessor, the system would have to use faster DRAM which would negatively impact the overall cost. Instead, the design team opted to integrating cache.

=== Key changes from {{\\|ARM2}} ===
* Goal 3x the performance
** Integrated cache
** Integrated clock generator
** Integrated control logic
** Integrated co-processor interface

==== New instructions ====
New ARM3 instructions:

'''Memory:'''

* <code>SWP</code> - Swap word memory-register, Atomic (uninterruptible)

=== Block Diagram ===
==== Entire Chip ====
: [[File:arm3 block diagram.svg|600px]]

==== Core ====
: [[File:arm2 block diagram.svg|650px]]

=== Memory Hierarchy ===
* Cache
** L1 Cache (unified)
*** 4 KiB, 64-way set associative
*** 16 B line size
*** Write-through policy
*** Per core
* System DRAM
** Up to 64 MiB

== Overview ==
=== Control ===
The ARM3's control logic is a state machine implemented as three [[PLA]]s. Layout was generated automatically using EDA tools using [[Psuedo nMOS]] logic in order to save on space, albeit at the slight expense of static power dissipation.

=== Core ===
==== Pipeline ====
{{main|acorn/microarchitectures/arm2#Pipeline|l1=ARM2 Pipeline}}
ARM3's pipeline is identical to the ARM2.

=== Clock Generator ===
To increase performance, Acorn needed to increase the clock speed. This was not possible without leaving commodity DRAM for higher speed and more expensive DRAM. The alternative approach Acorn went with is an intermediate cache on-die. The ARM3 has two clock inputs, one fast one for the internal cache and one slower one for the external memory accesses. The two inputs are entirely independent allowing the system to optimize for both (fast cache and slower memory) at the same time.

=== Coprocessor Interface ===
{{empty section}}
=== Cache ===
[[File:arm3 cache.svg|right|500px]]
The ARM3's cache consists of a RAM and 4 tag [[CAM]] banks of 64 22-bit entries each for 64-way set associative. The choice of a 4-way split was entirely driven by the great reduction in power dissipation (so only 1/4 of the CAM has to be active at any one time), at the cost of negligible performance. Each CAM entry refers to one line of data in the RAM. Each line consists of four 32-bit words (i.e., 128 bit lines) with the low-order address bits being used for the select lines. 

On a miss, a [[pseudo-random number generator]] is used to select an entry to evict and replace. On replacement a full line of four words is fetched from memory to minimize consecutive read operations. The cache uses a write-through update policy to ensure consistency. On a hit the appropriate line address are generated to be retrieved by the RAM.

The CAM consists of individual cells of [[six-transistor storage elements]] with a three-transistor [[comparators]]. The cell size was reported by Acorn to be 31.2 µm x 36.8 µm (1148.16 µm²) on a [[1.5 µm process]]. The entry matching and address encoding logic uses dynamic logic in order to reduce power. The [[RAM]] is arranged in array of 128 x 256 cells with a 3-bit column select, producing a 32-bit output. The SRAM cells used were standard [[6T]] SRAM cells measuring 19.6 µm x 28.4 µm. Self-timing logic is used to disable the 32 [[sense amplifiers]] when the data becomes valid in order to reduce power.

{{clear}}

== Die ==
* 12 MHz, 1 W
* [[1.5 µm]] DLM CMOS
* 8.72 mm x 9.95 mm
* 86.764 mm² die size
* 309,656 transistors
** 206,454 SRAM
** 62,973 CAM
** 40,229 logic
* QFP-160
** 119 signal pins
** 41 power/ground pins


:: [[File:arm3 die shot.png|650px]]


:: [[File:arm3 die shot (annotated).png|650px]]

== All ARM3 Chips ==
<!-- NOTE: 
           This table is generated automatically from the data in the actual articles.
           If a microprocessor is missing from the list, an appropriate article for it needs to be
           created and tagged accordingly.

           Missing a chip? please dump its name here: http://en.wikichip.org/wiki/WikiChip:wanted_chips
-->
{{comp table start}}
<table class="comptable sortable tc11 tc12 tc13">
<tr class="comptable-header"><th>&nbsp;</th><th colspan="12">List of ARM3-based Processors</th></tr>
{{comp table header 1|cols=Process, Launched, Frequency, Power Dissipation, Max Memory}}
{{#ask: [[Category:all microprocessor models]] [[instance of::microprocessor]] [[microarchitecture::ARM3]]
 |?full page name
 |?model number
 |?microarchitecture
 |?first launched
 |?base frequency#MHz
 |?power dissipation
 |?max memory#MiB
 |format=template
 |template=proc table 3
 |userparam=7
 |mainlabel=-
 |valuesep=,
}}
{{comp table count|ask=[[Category:all microprocessor models]] [[instance of::microprocessor]] [[microarchitecture::ARM3]]}}
</table>
{{comp table end}}

== References ==
* Thomas, A. R. P., et al. "A 2nd Generation 32b RISC Processor with 4KByte Cache." Solid-State Circuits Conference, 1989. ESSCIRC'89. Proceedings of the 15th European. IEEE, 1989.
codename	ARM3 +
core count	1 +
designer	Acorn Computers +
first launched	1989 +
full page name	acorn/microarchitectures/arm3 +
instance of	microarchitecture +
instruction set architecture	ARMv2a +
manufacturer	VLSI Technology + and Sanyo +
microarchitecture type	CPU +
name	ARM3 +
pipeline stages	3 +
process	1,500 nm (1.5 μm, 0.0015 mm) +