:[[File:skylake server block diagram.svg|850px]]

**** 4 entries; 4-way set associative

**** 1536 entries; 12-way set associative. (Note: STLB is incorrectly reported as "6-way" by CPUID leaf 2 (EAX=02H). Skylake erratum SKL148 recommends software to simply ignore that value.)

This is the first implementation to incorporate {{x86|AVX-512}}, a 512-bit [[SIMD]] [[x86]] instruction set extension. AVX-512 operations can take place on every port. For 512-bit wide FMA SIMD operations, Intel introduced two different mechanisms ways:

In the simple implementation, the variants used in the {{intel|Xeon Bronze|entry-level}} and {{intel|Xeon Silver|mid-range}} Xeon servers, AVX-512 fuses Port 0 and Port 1 to form a 512-bit FMA unit. Since those two ports are 256-wide, an AVX-512 option that is dispatched by the scheduler to port 0 will execute on both ports. Note that unrelated operations can still execute in parallel. For example, an AVX-512 operation and an Int ALU operation may execute in parallel - the AVX-512 is dispatched on port 0 and use the AVX unit on port 1 as well and the Int ALU operation will execute independently in parallel on port 1.

In the {{intel|Xeon Gold|high-end}} and {{intel|Xeon Platinum|highest}} performance Xeons, Intel added a second dedicated 512-bit wide AVX-512 FMA unit in addition to the fused Port0-1 operations described above. The dedicated unit is situated on Port 5.

In previous generations Intel had a feature called {{intel|cluster-on-die}} (COD) which was introduced with {{intel|Haswell|l=arch}}. With Skylake, there's a similar feature called {{intel|sub-NUMA cluster}} (SNC). With a memory controller physically located on each side of the die, SNC allows for the creation of two localized domains with each memory controller belonging to each domain. The processor can then map the addresses from the controller to the distributed home agents and LLC in its domain. This allows executing code to experience lower LLC and memory latency within its domain compared to accesses outside of the domain.

It should be pointed out that in contrast to COD, SNC has a unique location for every address in the LLC and is never duplicated across LLC banks (previously, COD cache lines could have copies). Additionally, on multiprocessor systems, addresses mapped to memory on remote sockets are still uniformly distributed across all LLC banks irrespective of the localized SNC domain.

In the last couple of generations, Intel has been utilizing {{intel|QuickPath Interconnect}} (QPI) which served as a high-speed point-to-point interconnect. QPI has been replaced by the {{intel|Ultra Path Interconnect}} (UPI) which is higher-efficiency coherent interconnect for scalable systems, allowing multiple processors to share a single shared address space. Depending on the exact model, each processor can have either two or three UPI links connecting to the other processors.

UPI links eliminate some of the scalability limitations that surfaced in QPI over the past few microarchitecture iterations. They use directory-based home snoop coherency protocol and operate at up either 10.4 GT/s or 9.6 GT/s. This is quite a bit different from previous generations. In addition to the various improvements done to the protocol layer, {{intel|Skylake SP|l=core}} now implements a distributed CHA that is situated along with the LLC bank on each core. It's in charge of tracking the various requests from the core as well as responding to snoop requests from both local and remote agents. The ease of distributing the home agent is a result of Intel getting rid of the requirement on preallocation of resources at the home agent. This also means that future architectures should be able to scale up well.