From WikiChip
μCOM-4 ISA - NEC
The μCOM-4 ISA was an instruction set architecture composed of 80 instructions that were implemented by the NEC in their μCOM-4 family of microcontrollers. The μCOM-43 family implemented the complete ISA, while the μCOM-44 and μCOM-45 families implemented a strict subset of it. (Note that the μCOM-42 family had its own instruction set.)
Block diagram[edit]
This section is empty; you can help add the missing info by editing this page. |
Registers[edit]
This section is empty; you can help add the missing info by editing this page. |
Features[edit]
This section is empty; you can help add the missing info by editing this page. |
Instructions[edit]
The μCOM-43 has support for all 80 instructions. The μCOM-44/μCOM-45 support a strict subset of it composed of 58 instruction. The majority of those 22 instructions deal with the added features only found in the μCOM-43 models.
Mnemonic | OPCode | Bytes | Cycles | Function | Meaning | Skip Condition |
---|---|---|---|---|---|---|
CLA | 90 | 1 | 1 | ACC ← 0 | Clear accumulator | |
CMA | 10 | 1 | 1 | ACC ← ~ACC | 1-s complement accumulator | |
CIA | 11 | 1 | 1 | ACC ← ~ACC + 1 | 2-s complement accumulator | |
INC | 0D | 1 | 1 + skip | ACC ← ACC + 1 | Increment accumulator, skip if overflow | on overflow |
DEC | 0F | 1 | 1 + skip | ACC ← ACC - 1 | Decrement accumulator, skip if underflow | on underflow |
CLC | 0B | 1 | 1 | C ← 0 | Clear carry flag | |
STC | 1B | 1 | 1 | C ← 1 | Set carry flag | |
XC | 1A | 1 | 1 | C ↔ C' | Exchange carry flag with carry save | |
RAR | 30 | 1 | 1 | C → ACC → C | Rotate accumulator right through carry flag | |
INM | 1D | 1 | 1 + skip | (DP) = (DP) + 1 | Increment RAM content pointed by DP, skip if result is zero | on (DP) = 0 |
DEM | 1F | 1 | 1 + skip | (DP) = (DP) - 1 | Decrement RAM content pointed by DP, skip if result is 0Fh | on (DP) = 0Fh |
AD | 08 | 1 | 1 + skip | ACC ← ACC + (DP) | Add RAM content pointed by DP to accumulator, skip if overflow | on overflow |
ADS | 09 | 1 | 1 + skip | ACC ← ACC + (DP) + C C ← 1 on overflow |
Add RAM content pointed by DP with carry to accumulator If overflow set carry flag and skip |
on overflow |
ADC | 19 | 1 | 1 | ACC ← ACC + (DP) + C C ← 1 on overflow |
Add RAM content pointed by DP with carry to accumulator If overflow set carry flag |
|
DAA | 06 | 1 | 1 | ACC ← ACC + 6 | Decimal adjust accumulator for BCD addition | |
DAS | 0A | 1 | 1 | ACC ← ACC + 10 | Decimal adjust accumulator for BCD subtraction | |
EXL | 18 | 1 | 1 | ACC ← ACC ^ (DP) | Exclusive-or accumulator with RAM content pointed by DP | |
LI | 90 + D[3:0] | 1 | 1 | ACC ← D[3:0] | Load accumulator with immediate data D[3:0] | |
S | 02 | 1 | 1 | (DP) ← ACC | Store accumulator into RAM location pointed by DP | |
L | 38 | 1 | 1 | ACC ← (DP) | Load accumulator with RAM content pointed by DP | |
LM | 38 + D[1:0] | 1 | 1 | ACC ← (DP) DPH ← DPH ^ D[1:0] |
Load accumulator with RAM content pointed by DP; Exclusive-or DPH with immediate data D[1:0] |
|
X | 28 | 1 | 1 | ACC ↔ (DP) | Exchange accumulator with RAM content pointed by DP | |
XM | 28 + D[1:0] | 1 | 1 | ACC ↔ (DP) DPH ← DPH ^ D[1:0] |
Exchange accumulator with RAM content pointed by DP; Exclusive-or DPH with immediate data D[1:0] |
|
XD | 2C | 1 | 1 + skip | |||
XMD | 2C + D[1:0] | 1 | 1 + skip | |||
XI | 3C | 1 | 1 + skip | |||
XMI | 3C + D[1:0] | 1 | 1 + skip | |||
LDI | 15 00 + D[6:0] | 2 | 2 | |||
LDZ | 80 + D[3:0] | 1 | 1 | |||
DED | 13 | 1 | 1 + skip | |||
IND | 33 | 1 | 1 + skip | |||
TAL | 07 | 1 | 1 | |||
TLA | 12 | 1 | 1 | |||
XHX | 4F | 1 | 2 | |||
XLY | 4E | 1 | 2 | |||
THX | 47 | 1 | 2 | |||
TLY | 46 | 1 | 2 | |||
XAZ | 4A | 1 | 2 | |||
XAW | 4B | 1 | 2 | |||
TAZ | 42 | 1 | 2 | |||
TAW | 43 | 1 | 2 | |||
XHR | 4D | 1 | 2 | |||
XLS | 4C | 1 | 2 | |||
SMB | 78 + D[1:0] | 1 | 1 | |||
RMB | 68 + D[1:0] | 1 | 1 | |||
TMB | 58 + D[1:0] | 1 | 1 + skip | |||
TAB | 24 + D[1:0] | 1 | 1 + skip | |||
CMB | 34 + D[1:0] | 1 | 1 + skip | |||
SFB | 7C + D[1:0] | 1 | 2 | |||
RFB | 6C + D[1:0] | 1 | 2 | |||
FBT | 5C + D[1:0] | 1 | 2 + skip | |||
FBF | 20 + D[1:0] | 1 | 2 + skip | |||
CM | 0C | 1 | 1 + skip | |||
CI | 17 C0 + D[3:0] | 2 | 2 + skip | |||
CLI | 16 E0 + D[3:0] | 2 | 2 + skip | |||
TC | 04 | 1 | 1 + skip | |||
TIT | 03 | 1 | 1 + skip | |||
JCP | C0 + D[5:0] | 1 | 1 | |||
JMP | A0 + D[10:8] 00 + D[7:0] |
2 | 2 | |||
JPA | 41 | 1 | 2 | |||
EI | 31 | 1 | 1 | |||
DI | 01 | 1 | 1 | |||
CZP | B0 + D[3:0] | 1 | 1 | |||
CAL | A8 + D[10:8] 00 + D[7:0] |
2 | 2 | |||
RT | 48 | 1 | 2 | |||
RTS | 49 | 1 | 2 + skip | |||
STM | 14 80 + D[5:0] | 2 | 2 | |||
TTM | 05 | 1 | 1 + skip | |||
SEB | 74 + D[1:0] | 1 | 2 | |||
REB | 64 + D[1:0] | 1 | 2 | |||
SPB | 70 + D[1:0] | 1 | 1 | |||
RPB | 60 + D[1:0] | 1 | 1 | |||
TPA | 54 + D[1:0] | 1 | 2 + skip | |||
TPB | 50 + D[1:0] | 1 | 1 + skip | |||
OE | 44 | 1 | 2 | |||
OP | 0E | 1 | 1 | |||
OCD | 1E 00 + D[7:0] | 2 | 2 | PORT[C,D] ← I7-I0 | ||
IA | 40 | 1 | 2 | ACC ← PORT[A] | ||
IP | 32 | 1 | 1 | ACC ← PORT[DPL] | ||
NOP | 00 | 1 | 1 | no operation |
- μCOM-43 only
Documents[edit]
References[edit]
- NEC Electronics (Europe) GmbH, 1982 Catalog, "μCOM-4: 4-Bit Single Chip Microcomputer Family", 143-176 pp.