ARMv1 is the first ARM instruction set version. Introduced with the ARM1 on April 26 1985, the ARMv1 defines a 32-bit ISA along with 26-bit addressing space. The ARMv1 was only implemented by the ARM1 and was replaced soon after by the ARM2. Only a few hundred of those chips were ever fabricated.

Overview

The ARMv1 is a simple architecture consisting of mostly simple operations along with a handful of complex ones. Each instruction is 32-bit in size and operates on two 32-bit operands. There is a 24-bit program counter allowing for a 26-bit address space of up to 64 MiB of memory.

Registers

There are 16 general purpose 32-bit registers. With the exception of register 15, all registers are orthogonal with no specific designated purpose.

Instruction Listing

The ARMv1 ISA has 45 operations under 23 mnemonics. The ARMv1 is broken down into 8 classes of instruction:

• Movement Instructions
• Load Instructions
• Store Instructions
• Arithmetic Instructions
• Logical Instructions
• Comparison Instructions
• Branch Instructions
• Miscellaneous Instructions

ARMv1 ISA
Mnemonic	Syntax	Description	Action
Movement Instructions Movement instructions move data between registers and operands.
MOV	MOV<cond>{S} Rd, #imm	Move value immed	Rd = immed
MOV	MOV<cond>{S} Rd, Rm, {, <shift>}	Move value	Rd = {shifted Rm}
MVN	MVN<cond>{S} Rd, #imm	Move NOT value immed	Rd = ¬immed
MVN	MVN<cond>{S} Rd, Rm, {, <shift>}	Move NOT value	Rd = ¬{shifted Rm}
Load Instructions Load instructions move the content of memory addresses into registers.
LDM	LDM<cond><type> Rn{!}, <reglist>{^}	Load multiple	addr = Rn for each Rd in {reglist}:      Rd = [addr]      update address based on {type}
LDR	LDR<cond>{B} Rd, [Rn {, #imm}]{!}	Load register immed	Rd = [Rn + imm] If !: Rn = Rn + imm
LDR	LDR<cond>{B} Rd, [Rn, Rm {, <shift>}]{!}	Load register	Rd = [Rn + {shifted Rm}] If !: Rn = Rn + {shifted Rm}]
LDR	LDR<cond>{B}{T} Rd, [Rn], #imm	Load register, post index	Rd = [Rn] Rn = Rn + imm
LDR	LDR<cond>{B}{T} Rd, [Rn], Rm {, <shift>}	Load register, post index	Rd = [Rn] Rn = Rn + {shifted Rm}
Store Instructions Store instructions moves the values from registers into memory.
STM	STM<cond><type> Rn{!}, <reglist>{^}	Store multiple	addr = Rn for each Rd in {reglist}:      [addr] = Rd      update address based on {type}
STR	STR<cond>{B} Rd, [Rn {, #imm}]{!}	Store register immed	[Rn + imm] = Rd If !: Rn = Rn + imm
STR	STR<cond>{B} Rd, [Rn, Rm {, <shift>}]{!}	Store register	[Rn + {shifted Rm}] = Rd If !: Rn = Rn + {shifted Rm}]
STR	STR<cond>{B}{T} Rd, [Rn], #imm	Store register, post index	[Rn] = Rd Rn = Rn + imm
STR	STR<cond>{B}{T} Rd, [Rn], Rm {, <shift>}	Store register, post index	[Rn] = Rd Rn = Rn + {shifted Rm}
Arithmetic Instructions Arithmetic instructions perform basic mathematical operations on two operands.
ADC	ADC<cond>{S} Rd, Rn, #imm	Add and carry immed	Rd = Rn + imm + C
ADC	ADC<cond>{S} Rd, Rn, Rm{, <shift>}	Add and carry	Rd = Rn + {shifted Rm} + C
ADD	ADD<cond>S Rd, Rn, #imm	Add immed	Rd = Rn + imm
ADD	ADD<cond>S Rd, Rn, Rm{, <shift>}	Add	Rd = Rn + {shifted Rm}
RSB	RSB<cond>S Rd, Rn, #imm	Reverse subtract immed	Rd = imm - Rn
RSB	RSB<cond>S Rd, Rn, Rm{, <shift>}	Reverse subtract	Rd = {shifted Rm} - Rn
RSC	RSB<cond>S Rd, Rn, #imm	Reverse subtract with carry immed	Rd = imm - Rn - ¬C
RSC	RSB<cond>S Rd, Rn, Rm{, <shift>}	Reverse subtract with carry	Rd = {shifted Rm} - Rn - ¬C
SBC	SBC<cond>{S} Rd, Rn, #imm	Subtract with carry immed	Rd = Rn - imm - ¬C
SBC	SBC<cond>{S} Rd, Rn, Rm{, <shift>}	Subtract with carry	Rd = Rn - {shifted Rm} - ¬C
SUB	SUB<cond>{S} Rd, Rn, #imm	Subtract immed	Rd = Rn - imm
SUB	SUB<cond>{S} Rd, Rn, Rm{, <shift>}	Subtract	Rd = Rn - {shifted Rm}
Logical Instructions Logical instructions perform logical bitwise operations on operands.
AND	AND<cond>{S} Rd, Rn, #imm	AND immed	Rd = Rn & imm
AND	AND<cond>{S} Rd, Rn, Rm{, <shift>}	AND	Rd = Rn & {shifted Rm}
BIC	BIC<cond>{S} Rd, Rn, #imm	Bit clear immed	Rd = Rn & ¬imm
BIC	BIC<cond>{S} Rd, Rn, Rm{, <shift>}	Bit clear	Rd = Rn & ¬Rm
EOR	EOR<cond>{S} Rd, Rn, #imm	Exclusive OR immed	Rd = Rn ⊕ imm
EOR	EOR<cond>{S} Rd, Rn, Rm{, <shift>}	Exclusive OR	Rd = Rn ⊕ {shifted Rm}
ORR	ORR<cond>{S} Rd, Rn, #imm	Logical OR immed	Rd = Rn ∥ imm
ORR	ORR<cond>{S} Rd, Rn, Rm{, <shift>}	Logical OR	Rd = Rn ∥ {shifted Rm}
Comparison Instructions Comparison instructions compare two values and set appropriate status flags.
CMN	CMN<cond> Rn, #imm	Compare negative immed	CPSR flags set on (Rn + imm)
CMN	CMN<cond> Rn, Rm{, <shift>}	Compare negative	CPSR flags set on (Rn + {shifted Rm})
CMP	CMP<cond> Rn, #imm	Compare immed	CPSR flags set on (Rn - imm)
CMP	CMP<cond> Rn, Rm{, <shift>}	Compare	CPSR flags set on (Rn - {shifted Rm})
TEQ	TEQ<cond> Rn, #imm	Test equality immed	CPSR flags set on (Rn ⊕ imm)
TEQ	TEQ<cond> Rn, Rm{, <shift>}	Test equality	CPSR flags set on (Rn ⊕ {shifted Rm})
TST	TST<cond> Rn, #imm	Test bits immed	CPSR flags set on (Rn & imm)
TST	TST<cond> Rn, Rm{, <shift>}	Test bits	CPSR flags set on (Rn & {shifted Rm})
Branch Instructions Branch instructions order instruction processing to start elsewhere conditionally or unconditionally.
B	B<cond> imm	Branch relative	PC = PC + address
BL	BL<cond> imm	Branch and link relative	LR = RET PC = PC + address
Miscellaneous Instructions Any instruction that doesn't belong anywhere else.
SWI	SWI<cond> imm	Software interrupt	LR = RET Execute SWI vector in supervisor mode

Multiplication and Floating Point

ARMv1 does not have support for multiplication. Software that requires multiplication will have to resort to a software implementation (e.g., Shift-and-Add Multiplication). This was considerably slow and was consequently added in later ARM versions. Likewise there was no support for hardware floating point or an ability to do such operations on an external FPU coprocessor.