Revision as of 18:11, 18 June 2018

Denver is a CPU microarchitecture from Nvidia introduced in 2014, capable of executing ARMv8 code natively and with help of dynamic code optimization. Native ARM decoder can issue up to 2 instructions per cycle, and up to 7 micro-operations are started per cycle when dynamic code translation is used.

Architecture

Denver is 7-wide in-order superscalar. It has ARMv8 hardware decoder which can generate up to 2 micro-ops per cycle. Also it can execute up to 7 micro-ops per-cycle directly from L1i cache. Denver has 7 execution units: 1 branch, 2 integer (1 has hardware multiply module), 2 FP/NEON (128-bit), 2 Load/Store units.

Denver 2 has dynamic branch prediction with Branch Target Buffer and Global History Buffer. It also has return stack buffer and indirect predictor.

Pipeline of Denver 1 has 15 stages, mispredict penalty is 13 cycles.

Dynamic Code Optimization

For often executed code optimization micro-interrupt can be generated and firmware-based optimizer is started. Using "Dynamic Profile Information" optimizer can translate ARMv8 instructions into optimized microcode sequence and save it into Optimization Cache. Then Denver will execute code directly from Optimization Cache without using hardware ARMv8 decoder. Several microcode sequences may be chained

In 2014 Nvidia listed several optimizations for the dynamic code translation:

• Unrolls Loops
• Renames registers
• Reorders Loads and Stores
• Improves control flow
• Removes unused computation
• Hoists redundant computation
• Sinks uncommonly executed computation
• Improves scheduling

Cache

For two cores of Denver total cache size is:

[Edit/Modify Cache Info]

Cache Organization Cache is a hardware component containing a relatively small and extremely fast memory designed to speed up the performance of a CPU by preparing ahead of time the data it needs to read from a relatively slower medium such as main memory. The organization and amount of cache can have a large impact on the performance, power consumption, die size, and consequently cost of the IC. Cache is specified by its size, number of sets, associativity, block size, sub-block size, and fetch and write-back policies. Note: All units are in kibibytes and mebibytes.

L1$ 284 KiB 290,816 B 0.277 MiB L1I$ 256 KiB 262,144 B 0.25 MiB 2x128 KiB 4-way set associative   L1D$ 128KiB 131,072 B 0.125 MiB 2x64 KiB 4-way set associative   L2$ 2 MiB 2,048 KiB 2,097,152 B 0.00195 GiB     1x2 MiB 16-way set associative

L1i TLB has 128 entries for 4 KiB pages and is 4-way set-associative. L1d TLB has 280 entries and supports 4 KiB, 64 KiB, 1 MiB and 2 MiB pages. TLB walk is accelerated by L2 TLB of 2048 entries in 4-way set-associative buffer.

Features

[Edit/Modify Supported Features]

	Supported ARM Extensions & Processor Features
	Thumb-2 Thumb-2 Extension PMUv3 ARMv8 PMUv3 Performance Monitors Extension Crypto Cryptographic Extension

Products

Denver is used in Nvidia's Tegra K1-64 (2014, 28 nm, model T132). It is used in Google's Nexus 9 tablet, produced by HTC.

Denver 2 is used in Nvidia's Terga X2 "Parker" (2016, 16 nm, model T186). Parker SoC has 4 Cortex-A57 cores and two Denver-2 cores. It is used in Nvidia Drive PX2 and Nvidia Jetson TX2.

Die

All Denver Chips

References

• NVIDIA’S FIRST CPU IS A WINNER. Denver Uses Dynamic Translation to Outperform Mobile Rivals. - Linley Gwennap (August 18, 2014)
• IEEE HotChips 26 (HC26), 2014 - Darrell Boggs "Nvidia's Denver Processor"
• Parker Series SoC Technical Reference Manual, Nvidia
• https://www.anandtech.com/tag/project-denver