From WikiChip
Difference between revisions of "hisilicon/k3/k3v1"
< hisilicon‎ | k3

(Graphics)
Line 60: Line 60:
 
* 14x GPIOs
 
* 14x GPIOs
 
* 8 Timers
 
* 8 Timers
 +
 +
== Features ==
 +
{{arm features
 +
|thumb=No
 +
|thumb2=No
 +
|thumbee=No
 +
|vfpv1=No
 +
|vfpv2=No
 +
|vfpv3=No
 +
|vfpv3-d16=No
 +
|vfpv3-f16=No
 +
|vfpv4=Yes
 +
|vfpv4-d16=No
 +
|vfpv5=No
 +
|neon=No
 +
|trustzone=No
 +
|jazelle=Yes
 +
|wmmx=No
 +
|wmmx2=No
 +
}}
  
 
== Graphics ==
 
== Graphics ==

Revision as of 03:27, 6 September 2017

Template:mpu K3V1 is a 32-bit performance ARM microprocessor introduced by HiSilicon in 2008. This chip incorporates a single ARM9 core with Jazelle support operating at 460 MHz (although later models might have supported higher frequency). This chip supports 32-bit or 16-bit DDR memory.

Cache

Main article: ARM9 § Cache

[Edit/Modify Cache Info]

hierarchy icon.svg
Cache Organization
Cache is a hardware component containing a relatively small and extremely fast memory designed to speed up the performance of a CPU by preparing ahead of time the data it needs to read from a relatively slower medium such as main memory.

The organization and amount of cache can have a large impact on the performance, power consumption, die size, and consequently cost of the IC.

Cache is specified by its size, number of sets, associativity, block size, sub-block size, and fetch and write-back policies.

Note: All units are in kibibytes and mebibytes.
L1$32 KiB
32,768 B
0.0313 MiB
L1I$16 KiB
16,384 B
0.0156 MiB
1x16 KiB4-way set associative 
L1D$16 KiB
16,384 B
0.0156 MiB
1x16 KiB4-way set associative 

Memory controller

[Edit/Modify Memory Info]

ram icons.svg
Integrated Memory Controller
Max TypeDDR
Controllers1
Channels1
Width16 bit, 32 bit

Expansions

  • 4x high-speed UART interfaces
  • 2x SPI
  • 2x I2C
  • USB 2.0 On-The-Go (HS OTG) PHY
  • USB 1.1
  • 2x MMC/SD/SDIO interface
  • 14x GPIOs
  • 8 Timers

Features

[Edit/Modify Supported Features]

Cog-icon-grey.svg
Supported ARM Extensions & Processor Features
VFPv4Vector Floating Point (VFP) v4 Extension
JazelleDirect Bytecode eXecution

Graphics

The K3V1 integrated graphics engine, although the exact specs are not available.

  • Support QVGA, WQVGA, VGA display resolutions
  • Hardware-acceleration video
    • Decode: MPEG4, H.263, H.264, and VC-1
      • Rate QCIF/CIF/QVGA/VGA/D1, frame rate up to 30fps
    • Encode: MPEG4 and H.263 video encoding
      • QCIF/CIF/QVGA/VGA, frame rate up to 30fps
  • 200 KiB Frame Buffer

Camera

  • Support 30 million pixel camera, up to 30fps
  • Supports up to 8 megapixel CMOS Sensor image input

Audio

  • Built-in high-performance audio CODEC
    • Sampling frequency support 44.1kHz and 48kHz
    • support for sound playback and recording
  • High quality stereo playback DAC and 1 channel Voice DAC, 2 channels
    • ADC, CODEC support any audio mixing, independent of the amplifier Output gain control

Block Diagram

hisilicon k3v1 block.png

Documents

Facts about "K3V1 - HiSilicon"
has ecc memory supportfalse +
l1$ size32 KiB (32,768 B, 0.0313 MiB) +
l1d$ description4-way set associative +
l1d$ size16 KiB (16,384 B, 0.0156 MiB) +
l1i$ description4-way set associative +
l1i$ size16 KiB (16,384 B, 0.0156 MiB) +
max memory channels1 +
supported memory typeDDR +