Revision as of 12:47, 21 October 2019

Edit Values
HECToR
General Info
Sponsors	EPSRC, NERC, BBSRC
Designers	Cray
Operators	EPCC
Introduction	October 2007
Retired	March 24 2014
Peak FLOPS	829 teraFLOPS
Price	$85,000,000
Succession
ARCHER

HECToR (High-End Computing Terascale Resource) was terascale x86 supercomputer serving as the UK's primary academic research supercomputer. HECToR has been superseded by ARCHER.

Overview

HECToR was a UK academic national supercomputer service funded by NERC, EPSRC, and BBSRC for the academic community. HECTor was deployed in a number of phases with each phase upgrading it to over double the performance.

Phases

HECToR underwent 5 major upgrades.

Phase 1

Phase 1 was the initial system was based on the Cray XT4 (Rainier) system. The system comprised of 1416 compute blades across 60 cabinets. There are four sockets per blade. The processors are dual-core AMD Opteron operating at 2.8 GHz. There is 6 GB of memory per socket for a total system memory of 33.2 TiB. Rainier had a peak compute performance of 63.44 teraFLOPS.

In addition to the computational nodes, there were 24 additional service blades with dual-socket dual-core processors that were used for facilitating the supercomputer services such as login, control, and network management.

The system relies on Cray SeaStar2 interconnect. There's one SeaStar2 chip for every two node which comes with 6 network links. The network implements a 3D-torus. The MPI point-to-point bandwidth is was 2.17 GB/s, with a minimum bi-section bandwidth of 4.1 TB/s, and with a node-to-node latency of around 6 μs.

The memory subsystem:

Phase 1b

The system was upgraded in August 2008 with a small vector system. 28 Cray X2 (Black Widow) vector compute nodes were added. Each node had 4 Cray vector processor. There are 32 GiB of memory for node for a total of 896 GiB of memory.

With each vector processor capable of 25.6 gigaFLOPS, the new addition adds 2.87 teraFLOPS of compute to the existing system. The MPI point-to-point bandwidth is was 16 GB/s, with a minimum bi-section bandwidth of 254 GB/s, and with a node-to-node latency of around 4.6 μs.

The memory has also been upgraded.

Phase 2

Phase 2a

Phase 2a

This section is empty; you can help add the missing info by editing this page.

Phase 3

Phase 3

HECToR Phase 3 is a Cray XE6 supercomputer. The system comprises 704 compute blades across 30 cabinets. Each blade incorporates four compute nodes. Within a compute node are two 16-core AMD Opteron 2.3GHz Interlagos-based processors.

There are 16 GiB of memory per socket for a total system memory of 88 TiB. With 90,112 cores, the system had a peak compute performance of 829 teraFLOPS. In addition to the computational nodes, there are 16 additional blades with two dual-core processors per node which is used for various services such as login, control, and network management.

The system relies on Cray Gemini interconnect. There's one Gemini chip for every two node which comes with 10 network links. The network implements a 3D-torus. The MPI point-to-point bandwidth is >= 5 GB/s with a node-to-node latency of around 1-1.5μs.

• high-performance RAID disks: >1 PiB
• Network Attached Storage: 70 TiB
• MAID (Massive Array of Idle Disks): 168 TiB

TOP500