From WikiChip
Difference between revisions of "general instrument/sba/sba-1"
< general instrument‎ | sba

m (typo)
 
(3 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
{{gi title|SBA-1}}
 
{{gi title|SBA-1}}
−
The '''GI SBA-1''' ('''General Instrument Microelectronics Sequential Boolean Analyzer-1''') is a [[1-bit architecture]] microprocessor developed by [[General Instrument|General Instrument's Microelectronics]] division. The chip featured 24 basic instructions, 16-level stack, and storage. This is an identical version of the [[GI SBA]] without the on-chip ROM. ROM data lines instead were brought out allowing external RAM or ROM to be hooked up.
+
{{mcu
 +
| name            = GI SBA-1
 +
| manufacturer    = General Instrument
 +
| model number    = SBA-1
 +
| part number    =
 +
| market          = Industrial
 +
| first launched  = November, 1977
 +
| family          = SBA
 +
| clock min      = 10 kHz
 +
| clock max      = 800 kHz
 +
| tech            = nMOS
 +
| word size      = 1 bit
 +
| electrical      = yes
 +
| temp max        = 70 °C
 +
| temp min        = 0 °C
 +
| vdd            = 12 V
 +
| vss            = 0 V
 +
| ram            = 120 b
 +
| ram break      = 120x1 bits
 +
| stack levels    = 16
 +
| pins            = 40
 +
| io lines        = 31
 +
| package        = DIP40
 +
| package type    = DIP
 +
}}
 +
The '''GI SBA-1''' is a {{arch|1}} [[microcontroller]] developed by [[General Instrument]] as part of their {{gi|SBA|SBA family}}. This is an identical version of the {{gi|sba/sba|SBA}} without the on-chip ROM. ROM data lines instead were brought out allowing external RAM or ROM to be hooked up.
 +
 
 +
== ISA ==
 +
{{main|general_instrument/sba#Instruction_Set|l1=SBA Instruction Set}}
 +
This chip had 24 instructions, all 8-bit words, and had a single-cycle datapath.
 +
 
 +
== See Also ==
 +
* {{gi|SBA}}
 +
 
  
  
 
{{stub}}
 
{{stub}}
−
[[Category:1-bit microprocessors]]
 

Latest revision as of 04:28, 22 January 2016

GI SBA-1
no photo (ic).svg
Manufacturer General Instrument
Model Number SBA-1
Market Industrial
Introduction November, 1977 (launch)
General information
Family SBA
Clock 10 kHz-800 kHz
Microarchitecture
Technology nMOS
Word size 1 bit
0.125 octets
0.25 nibbles
Electrical
Op. Temp 0 °C – 70 °C
Supply VDD 12 V
Supply VSS 0 V
RAM 120 b
1.5e-5 MB
0.015 kB
15 B
1.5e-8 GB
(120x1 bits)
Stack 16 levels
Pins
I/O ports 31
Package DIP40 (DIP)

The GI SBA-1 is a 1-bit microcontroller developed by General Instrument as part of their SBA family. This is an identical version of the SBA without the on-chip ROM. ROM data lines instead were brought out allowing external RAM or ROM to be hooked up.

ISA[edit]

Main article: SBA Instruction Set

This chip had 24 instructions, all 8-bit words, and had a single-cycle datapath.

See Also[edit]


Text document with shapes.svg This article is still a stub and needs your attention. You can help improve this article by editing this page and adding the missing information.
Retrieved from "https://en.wikichip.org/w/index.php?title=general_instrument/sba/sba-1&oldid=15097"
Facts about "SBA-1 - General Instrument"
RDF feed
familySBA +
first launchedNovember 1977 +
full page namegeneral instrument/sba/sba-1 +
instance ofmicrocontroller +
manufacturerGeneral Instrument +
market segmentIndustrial +
max operating temperature70 °C +
min operating temperature0 °C +
model numberSBA-1 +
nameGI SBA-1 +
packageDIP40 +
ram1.5e-5 MB (0.015 kB, 15 B, 120 b, 1.5e-8 GB) +
ram breakdown120x1 bits +
technologynMOS +
word size1 bit (0.125 octets, 0.25 nibbles) +