Editing general instrument/sba

The '''GI SBA''' ('''General Instrument Microelectronics Sequential Boolean Analyzer''') is a [[1-bit architecture]] microprocessor developed by [[General Instrument|General Instrument's]] [[General Instrument Microelectronics|Microelectronics]] division. The chip featured 24 basic instructions, 1023 words of ROM, 16-level stack, and storage. The [[GI SBA-1]] is an identical chip without the ROM; ROM data lines were brought out instead to allow external storage.


{{stub}}
[[Category:1-bit microprocessors]]
@@ Line 1: / Line 1: @@
-{{gi title|SBA}}
+The '''GI SBA''' ('''General Instrument Microelectronics Sequential Boolean Analyzer''') is a [[1-bit architecture]] microprocessor developed by [[General Instrument|General Instrument's]] [[General Instrument Microelectronics|Microelectronics]] division. The chip featured 24 basic instructions, 1023 words of ROM, 16-level stack, and storage. The [[GI SBA-1]] is an identical chip without the ROM; ROM data lines were brought out instead to allow external storage.
-{{ic family
-| title             = GIM SBA
-| image             = <!-- Image representation of the IC family, e.g. "MCS-4.jpg"   -->
-| caption           = <!-- description of the image                                  -->
-| developer         = General Instrument
-| manufacturer      = General Instrument
-| type              = microcontrollers
-| production start  = November, 1977
-| production end    =
-| arch              = 1-bit
-| isa               = SBA
-| word              = 1 bit
-| proc              = <!-- process, e.g. "8 μm"                                      -->
-| tech              = nMOS
-| clock min         = 10 kHz
-| clock max         = 800 kHz
-| package           = DIP40
-}}
-The '''GI SBA''' ('''Sequential Boolean Analyzer''') was a [[microprocessor family|family]] of {{arch|1}} [[microcontroller]]s developed by [[General Instrument|General Instrument's Microelectronics]] division. These microcontrollers served as cheap [[programmable logic controller]]s, replacing old relay system.
-== Members ==
-{| class="wikitable sortable"
-|-
-! Part !! [[RAM]] !! [[ROM]] !! I/O Ports !! Notes
-|-
-| {{\|SBA}} || 120x1 bits || 1024x8 bits || 31 ||
-|-
-| {{\|SBA-1}} || 120x1 bits ||  || 31 || external storage
-|-
-| {{\|SBA-2}} || 120x1 bits || 2048x8 bits || 31 || ?ever released?
-|}
-== Architecture ==
-The SBA family had a large number (over 30) of I/O ports that could all be individually accessed programatically. Additionally, it had a relatively complex scheme of data storage. In total there were 120 words (1-bit each). This was broken down into 4 pages of 30 addresses each. The program had to choose which page it was working with currently and once that was done, any address selection was done on that page.
-{{expand section}}
-=== ISA ===
-{{main|general_instrument/sba/isa|l1=SBA ISA}}
-The SBA family had 8-bit instructions consisting of instructions with immediate and without [[immediate value]]s. In total there were 24 instructions used for arithmetic, I/O, and page switching.
 {{stub}}
+[[Category:1-bit microprocessors]]
designer	General Instrument +
full page name	general instrument/sba +
instance of	microcontroller family +
instruction set architecture	SBA +
main designer	General Instrument +
manufacturer	General Instrument +
name	GIM SBA +
package	DIP40 +
technology	nMOS +
word size	1 bit (0.125 octets, 0.25 nibbles) +