mirc/commands/sockudp

The /sockudp command allows you to send data to a specific address at a specific port destination.

Note: if /sockudp fails, it sets $sock().wserr to the error value, and trigger on sockwrite with $sockerr set etc.

Synopsis

/sockudp -bntkd [bindip] <name> [port] <ipaddress> <port> [numbytes] [text|%var|&binvar]

-b - Indicates that you are specifying the numbytes value which is the number of bytes you want send, the full line is sent otherwise
-n - Appens a $crlf to the line being sent if it's not a &binvar or if does not already end with a $crlf
-t - Forces mIRC to send anything beginning with a & as plain text
-k - Keeps the socket opened
-d - Means you have specified the ip address as the bind address

[bindip] - If -d has been specified, the ip address you want to use as the bind address.
<name> - The sockname name.
[port] - If specified, the local port to use, otherwise mIRC choose one randomly.
<ipaddress> - The ip address you want to send to information to, use you localhost 127.0.0.1 with -k to create a listening socket.
<port> - The port you want to send to information to, that's your listening port if you create a server.
[numbytes] - If -b has been specified, indicates the number of bytes you want to send.

Added: mIRC v5.5

Added On: 08/01/99

Note: Individual switches were not taken into consideration.