From WikiChip
Difference between revisions of "marvell/armada/628"
< marvell‎ | armada

m (Bot: corrected param)
m (link)
Line 84: Line 84:
 
| package 0 length    =  
 
| package 0 length    =  
 
}}
 
}}
'''ARMADA 628''' was a {{arch|32}} [[tri-core]] [[ARM]] microprocessor introduced by [[Marvell]] in 2011. This processor, which is based on Marvell's {{marvell|Sheeva PJ4|l=arch}} microarchitecture, operated at 1.5 GHz for the 2 "big cores" with lower frequency for the third low-power core. The 628 supported up to 2 GiB of DDR3-1066 memory and integrated a [[Vivante]] {{vivante|GC1000}} [[IGP]].
+
'''ARMADA 628''' was a {{arch|32}} [[tri-core]] [[ARM]] microprocessor introduced by [[Marvell]] in 2011. This processor, which is based on Marvell's {{marvell|Sheeva PJ4|l=arch}} microarchitecture, operated at 1.5 GHz for the 2 [[big cores]] with lower frequency for the third [[little core|low-power core]]. The 628 supported up to 2 GiB of DDR3-1066 memory and integrated a [[Vivante]] {{vivante|GC1000}} [[IGP]].
  
 
The ARMADA 628 featured three heterogeneous cores - two identical large powerful cores operating at 1.5 GHz each with a third lower power core which operated at just 624 MHz whenever lightweight work was done which helped save power.
 
The ARMADA 628 featured three heterogeneous cores - two identical large powerful cores operating at 1.5 GHz each with a third lower power core which operated at just 624 MHz whenever lightweight work was done which helped save power.

Revision as of 14:22, 22 July 2017

Template:mpu ARMADA 628 was a 32-bit tri-core ARM microprocessor introduced by Marvell in 2011. This processor, which is based on Marvell's Sheeva PJ4 microarchitecture, operated at 1.5 GHz for the 2 big cores with lower frequency for the third low-power core. The 628 supported up to 2 GiB of DDR3-1066 memory and integrated a Vivante GC1000 IGP.

The ARMADA 628 featured three heterogeneous cores - two identical large powerful cores operating at 1.5 GHz each with a third lower power core which operated at just 624 MHz whenever lightweight work was done which helped save power.

Cache

Main article: Sheeva PJ4 § Cache

[Edit/Modify Cache Info]

hierarchy icon.svg
Cache Organization
Cache is a hardware component containing a relatively small and extremely fast memory designed to speed up the performance of a CPU by preparing ahead of time the data it needs to read from a relatively slower medium such as main memory.

The organization and amount of cache can have a large impact on the performance, power consumption, die size, and consequently cost of the IC.

Cache is specified by its size, number of sets, associativity, block size, sub-block size, and fetch and write-back policies.

Note: All units are in kibibytes and mebibytes.
L1$192 KiB
196,608 B
0.188 MiB
L1I$96 KiB
98,304 B
0.0938 MiB
3x32 KiB  
L1D$96 KiB
98,304 B
0.0938 MiB
3x32 KiB  

L2$1 MiB
1,024 KiB
1,048,576 B
9.765625e-4 GiB
  1x1 MiB  

Memory controller

[Edit/Modify Memory Info]

ram icons.svg
Integrated Memory Controller
Max TypeDDR3-1066, DDR2-800
Supports ECCNo
Max Mem2 GiB
Controllers1
Channels1
Max Bandwidth7.942 GiB/s
8,132.608 MiB/s
8.528 GB/s
8,527.658 MB/s
0.00776 TiB/s
0.00853 TB/s
Bandwidth
Single 7.942 GiB/s

Static Memory Controller

  • 4 chip selects, up to 256 MB each
  • Asynch/Sync operation up to 78 MHz
  • A/D and AA/D Mode, x8 & x16 NOR Flash interface
  • Support for VLIO or companion chips

NAND Flash Controller

  • ONFI compliant controller supporting SLC and MLC NAND, x8 & x16, small block and large block
  • 2 Chip Selects with up to 64GB of address space
  • Support for 2 KB and 4 KB page sizes
  • 2-bit detect/1-bit correct ECC & 16-bit correct BCH

MMC, SD and SDIO Controller

  • 4x MMC/SD/SDIO/CE-ATA Controllers
  • Supports MMC/eMMC v4.2, 4.3 and 4.4
  • SDIO v 2.0, SDcard v2.1 and v3.0 (UHS-I)
  • CE-ATA 1/4/8-Bit, SPI mode and boot suppor

Expansions

[Edit/Modify Expansions Info]

ide icon.svg
Expansion Options
USB
Revision2.0
Ports3
Features2x HSIC, 1x FSIC/12pin ULPI
UART
Ports4
I²C
Ports6

JTAGYes


Graphics

[Edit/Modify IGP Info]

screen icon.svg
Integrated Graphics Information
GPUGC1000
DesignerVivante
Frequency500 MHz
0.5 GHz
500,000 KHz
OutputHDMI, DSI

Max Resolution
HDMI1920x1080
DSI1920x1080

Standards
DirectX11
OpenGL3.0
OpenCL1.2
OpenGL ES3.1
  • 1080p decode support for H.264 high profile, VC-1/WMV, MPEG-4, MPEG-2, H.263, On-2.
  • 1080p encode support for h.264 high profile, MPEG-4, MPEG-2, H.263 and On-2

Hardware Accelerators

Marvell Wireless Trusted Module v3

  • Hashing units: MD5, SHA-1, HMAC-SHA-1; SHA-224/SHA256 and HMAC, SHA-512 and HMAC, MD5 and HMAC-MD5
  • Symmetric crypto: AES (128 to 256 & ECB, CBC, CTR/XTS modes), DES/3DES (ECB & CBC), RC4
  • Asymmetric crypto: ECC (Prime field ECC, FIPS std curve EC-224/256, EC-DSA) & RSA (RSA key gen, PKCS#1 v1.5/v2.1 Digital Signatures, x.509 Digital Certificate), & DiffieHellman Key exchange. True HW RNG, FIPS 140-2 certification

Features

[Edit/Modify Supported Features]

Cog-icon-grey.svg
Supported ARM Extensions & Processor Features
VFPv3-D16Vector Floating Point (VFP) v3 (16 Regs) Extension
NEONAdvanced SIMD extension
WMMXWireless MMX
WMMX 2Wireless MMX 2
Facts about "ARMADA 628 - Marvell"
has ecc memory supportfalse +
integrated gpuGC1000 +
integrated gpu base frequency500 MHz (0.5 GHz, 500,000 KHz) +
integrated gpu designerVivante +
l1$ size192 KiB (196,608 B, 0.188 MiB) +
l1d$ size96 KiB (98,304 B, 0.0938 MiB) +
l1i$ size96 KiB (98,304 B, 0.0938 MiB) +
l2$ size1 MiB (1,024 KiB, 1,048,576 B, 9.765625e-4 GiB) +
max memory bandwidth7.942 GiB/s (8,132.608 MiB/s, 8.528 GB/s, 8,527.658 MB/s, 0.00776 TiB/s, 0.00853 TB/s) +
max memory channels1 +
supported memory typeDDR3-1066 + and DDR2-800 +