Revision as of 10:58, 2 July 2014

Template:mIRC Guide

mIRC variables are items which can hold data temporarily, or permanently, for use at a later time.. You can create, edit, or delete them at any time. All mIRC variables must be prefixed with a % sigil (example %var or %cookies). Variables are untyped – therefore capable of storing letters, numbers, or strings at any given point.

Variable Scope: Global vs. Local

There are two kinds of variables: local and global. Scope refers to the visibility of variables in your code. In other word, where these variables can be seen from.

Local Variables

Local Variables are given local scope. They are created for the duration of the script that made them and they can only be accessed from within the code line, or block in which they were created in. Once the script has finished, the variable is deleted.

Syntax:

;single variable
var %temp = value
 
;multiple variables
var %a = value, %b = second value, %c = and so on and so forth

Note: Since mIRC 6.21, you can avoid using the = sign when using the /var commmand.

Local variables are good for temporary things like string manipulations and math expressions. Most of your code will use local variables.

Below is a simple addition alias that uses two local variables:

alias add {
  var %number1 = $1, %number2 = $2
  echo -a %number1 + %number2 = $calc(%number1 + %number2)
}

An example usage of the script above is: /add 1 3 which will output: 1 + 3 = 4. Once the add alias has finished executing, both "%number1" and "%number2" are destroyed. Remember, these local variables cannot be called upon outside of their code blocks.

Incorrect use of local variables:

alias wrong {
  var %myvar = 3
  wronger
}
alias wronger {
  echo -a %myvar
}

If you were to execute the above by typing /wrong, you would get the following error: * /echo: insufficient parameters. This is because the local variable, in this case %myvar, has been stored within the wrong alias code block, and is, therefore, unavailable to the /wronger alias that has been called.

Global Variables

A global variable is a variable that is accessible from every alias or event. They can be created and edited from every script. They are not deleted unless they are purposely destroyed using the unset command (we will talk about that later on).

Syntax:

;create variable
set %var value

Note: The /set command does not use the = operator.

Because the /set command can only set a single variable at a time, you can use the /var command in conjunction with -g switch to set multiple global variables.

;multiple variables
var -g %var = foo, %var2 = bar, %var3 = foobar

Practical use: a global variable is good for storing variables that you will need to use in the future from another script or at different time. (Login System, Away System, Sockets, Etc...)

The equel sign '='

Although it's not require since 6.21, the equel sign can be used to assign a value to a variable without actually using a command:

%var = value

If %var is local, this will change the local variable. If %var is global, it will naturally change the global variable. If %var doesn't exist, it will create a global variable.

Unsetting Variables

If you have already set a variable you can unset it at any time during using the /unset command. The unset command supports a single variable or multiple variables. Generally, there is no reason to unset local variables as they will get destroyed anyway at the conclusion of the script execution.

Syntax:

;unset a single variable
unset %variable
 
;unset multiple variables
unset %var1 %var2 %var3

The /unset command supports wildcard characters to be able to unset multiple variables. For example:

alias unsetWildExample {
  set %exampleHello hello there
  set %exampleTest another var
  set %exampleVar yet another var
 
  ;unset all of them
  unset %example*
}

You can also unset all of the variables using the /unsetall command.

Caution: This will permanently delete all of your variables! You cannot recover them once you have performed this command, so be careful.

$null values

If a variable is referred to but does not exist, it returns the value $null. Likewise, a variable without any data stored in it returns $null as well.

alias nullExample {
  ; make sure our variable doesn't exist
  unset %example1
  if (%example == $null) {
    echo -a % $+ example1 is null!
  }
  ; set a variable with no data
  set %example2
  if (%example2 == $null) {
    echo -a % $+ example2 is also null!
  }
}

Upon executing /nullExample, you will notice that mIRC will echo the following to the active window:

%example1 is null!
%example2 is also null!

Math Operations

The standard assignment operator (=) can also be used to do basic two-operand math operations.

For Example:

alias mathExample {
  ;10
  var %a = 5 + 5
  ;9
  var %b = %a - 1
  ;90
  var %c = %b * %a
  ;print it to the screen
  echo -a %c
}

mIRC has two additional commands that can be used to easily increase and decrease the value of a numerical variable.

The dec command allows you to decrease the value of a variable by 1 or by a given value if specified:

dec %var [value]

For Example:

alias example {
  var %g = 10
  dec %g
  ;9
  echo -a %g
}

The inc command allows you to increase the value of a variable by 1 or by a given value if specified:

inc %var [value]

For Example:

on *:action:$(slaps $me $+ *):#mSL:{
  ;increase the variable by 1
  inc %slaps
  msg $chan I have seen %slaps slaps!
}

Dynamic Variable Names

In many occasions you may need to save individualized data (data for a particular user or channel for example). Dynamic variables allow you to do just that. A dynamic variable's name usually consists of a static part (a part that doesn't change) and a dynamic part (the part that changes).

Saving Values

The basic syntax to save a dynamic variable is:

set %<static_part> $+ <dynamic_part>
; or (use var -g to make them global variables)
var %<static_part> $+ <dynamic_part>

Although you can omit the static part out, its strongly discouraged because variables should have a meaningful name that explains their purpose.

Let's take a look at an example:

on *:text:!setColor *:#:{
  ;save their favorite color
  set %color. $+ $nick $2
  notice $nick Your favorite color $qt($2) was saved!
}

Let's take a closer look at the variable assignment statement:

set %color. $+ $nick $2

The static part is color., which is never going to change, and the dynamic part is $nick. Let's assume someone by the name John types !setColor blue; this is what happens:

1. mIRC evaluates the identifier $nick to "John" and $2 to blue
   

   set %color. $+ John blue

2. mIRC will then append "John" to "%color." Before executing the /set command, thus the final variable looks like this:
   

   %color.John blue

Retrieving Values

Static Variables Retrieving values from static variables is pretty straightforward. Let's assume you have a variable called %myvar and it's value is abc, you can get this value simply by referring to the variable outright:

alias showVar {
  echo -a Here is the value of % $+ myvar: %myvar
}

Simply put, this will echo the following to the active window where you typed the /showVar command:

Here is the value of %myvar: abc

Dynamic Variables Retrieving a value from a dynamic variable is a little bit more complicated. There is two ways:

%<static> [ $+ [ <dynamic> ] ]

This is the [[Evaluation_Brackets - mIRC]|eval] evaluation brackets method, both [ and ], are an essential part of retrieving the value from a dynamic variable. They allow us to force mIRC to evaluate part of a statement before anything else. Take a look at the rest of the myColor script:

on *:text:!favColor *:#:{
  var %color = %color. [ $+ [ $2 ] ]
  if (%color != $null) {
    notice $nick $2's favorite color is %color $+ .
  }
  else {
    notice $nick $2 does't have a favorite color set yet.
  }
}

In the example above, we retrieved the color from the dynamic variable and set it to a local variable called %color for use in the rest of the script. Let's take a closer look at the retrieval statement:

var %color = %color. [ $+ [ $2 ] ]

When you first glance at this statement, it might look a bit confusing, but in fact it is pretty straightforward. Let us continue with John's example and assume someone else typed !favColor John:

1. The first thing mIRC will evaluate is the innermost evaluation brackets [ ], in this case its $2, which will evaluate to John.
   

   %color. [ $+ John ]

2. mIRC will then evaluate the outer evaluation bracket "$+ John".
   %color.John

Here is another example:

alias varExample {
  var %array.1 = Item A
  var %array.2 = Item B
  var %array.3 = Item C
  var %array.4 = Item D
  var %array.5 = Item E
  var %x = 1
  while (%x <= 5) {
    echo -a %x = %array. [ $+ [ %x ] ]
    inc %x
  }
}

The above code will echo the following:

1 = Item A
2 = Item B
3 = Item C
4 = Item D
5 = Item E

What this does is create a bunch of static variables, each with ascending-ordered numerical digits. You will notice we used the evaluation brackets around the variable counter, %x. This allows mIRC to evaluate the variable, and attach it to the static portion of %array.. Basically, during run-time, whatever the %x variable's value is will be automatically appended to %array..

Variables are a great resource to have at your fingertips within mIRC! As you've seen, they are very powerful, and yet don't require too much of a headache to understand :)