Editing eta compute/ecm353x/ecm3532

{{eta compute title|ECM3532}}
{{chip
|name=ECM3532
|no image=Yes
|designer=Eta Compute
|model number=ECM3532
|market=Embedded
|first announced=February 12, 2020
|first launched=April, 2020
|family=ECM353x
|frequency=100 MHz
|isa=ARMv7-M
|isa family=ARM
|microarch=Cortex-M3
|microarch 2=CoolFlux DSP16
|technology=CMOS
|power=1 mW
|v core min=0.54 V
|v core max=3 V
|package name 1=eta_compute,bga81
|predecessor=ECM3531
|predecessor link=eta_compute/ecm353x/ecm3531
}}
'''ECM3532''' is an extreme-low-power microcontroller designed by [[Eta Compute]] and introduced in [[2020]]. Fabricated on [[55ULP|55 nm (55ULP) process]], this chip is designed for the processing of AI at the edge for long-term battery-powered and energy-harvesting IoT applications. This chip is integrates a {{armh|Cortex-M3|l=arch}} and an NXP CoolFlux DSP16 dual-MAC DSP operating at up to 100 MHz. When launched, in early 2020, the ECM3532 was the lowest-power commercial [[neural processor|AI edge processor]] in the world with typical AI workloads running at well under 1 mA for total power consumption of less than a single [[milliwatt]].

== Overview ==
The ECM3532 is a multi-core [[neural processor]] which incorporates an [[Arm]] {{armh|Cortex-M3|l=arch}} along with a dual-MAC NXP CoolFlux DSP16. Additionally, the chip incorporates 512 KiB of Flash and a total of 352 KiB of [[SRAM]]. The chip started sampling in early January 2020 and entered production in the second quarter of 2020. The ECM3532 is designed for extreme-low-power applications which can last years on battery or solar. The chip is designed to have 7 uA stall current, 500 nA sleep current with RTC on and 750 nA for sleep current with RTC on and 32 KiB of memory. Under typical operations, the chip can operate at under 5 uA/MHz (or up to 13 uA/MHz for intense applications such as Coremark). At a peak frequency of 100 MHz, this translates to around 400 uA and at around 3V, this yields around 1.2 mW of power. This makes this chip, when introduced in early 2020, the world's lowest-power [[neural processor|AI chip]].

Under normal operation, the chip executes on the {{armh|Cortex-M3|M3|l=arch}} which then offloads the more intensive repreated neural-network computations to the DSP. The CoolFlux DSP16 features a dual MAC architecture, allowing for up to two 16-bit MACs per cycle (4 OPS/cycle) or up to four 8-bit MACs per cycle (8 OPS/cycle). The DSP16 has its own 96 KiB of [[SRAM]] in addition to the 256 KiB shared by the entire SoC. With 8-bit weights, 64 KiB of memory is enough for 65,536 weights. Operating at up to 100 MHz, this chip had a peak raw ML performance of up to 800 [[MOPS]].

=== CFVS ===
{{empty section}}

== Memory ==
The ECM3532 includes the following:

* 512 KiB Flash
* 256 KiB SRAM
** 96 KiB private to DSP16
* 8 KiB ROM

== I/O ==
* 32-pin [[GPIO]]
* 2x UART
* 3x SPI
* 3x I2C
* 4x PDM
* 1x I2S

* 2-channel ADC
* Temp sensor

== Block diagram ==
:[[File:ecm3532 block.png|500px]]
base frequency	100 MHz (0.1 GHz, 100,000 kHz) +
core voltage (max)	3 V (30 dV, 300 cV, 3,000 mV) +
core voltage (min)	0.54 V (5.4 dV, 54 cV, 540 mV) +
designer	Eta Compute +
family	ECM353x +
first announced	February 12, 2020 +
first launched	April 2020 +
full page name	eta compute/ecm353x/ecm3532 +
instance of	microprocessor +
isa	ARMv7-M +
isa family	ARM +
ldate	April 2020 +
market segment	Embedded +
microarchitecture	Cortex-M3 + and CoolFlux DSP16 +
model number	ECM3532 +
name	ECM3532 +
package	BGA-81 +
power dissipation	0.001 W (1 mW, 1.341e-6 hp, 1.0e-6 kW) +
technology	CMOS +