From WikiChip
Difference between revisions of "mirc/introduction"
< mirc

(Wrong Examples)
Line 256: Line 256:
  
 
== Multiple block of code ==
 
== Multiple block of code ==
 +
 +
You can have multiple aliases in one single file but you cannot define an alias inside another alias, each alias must go on what we call the 'root' level, or 'top' level.
 +
 +
When you start with an empty script file, you're on the top level, meaning you can add an alias there. Inside that alias, you're not on the top level, you're inside the alias, which can be seen as the level depth '1'. So if you want to add more aliases, always do so on the top level:
 +
 +
=== <span style="color: #9E1010;">Wrong Example</span> ===
 +
<source lang="mIRC">
 +
alias first {
 +
 +
alias second {
 +
 +
}
 +
 +
}
 +
</source> There the second alias is defined inside the first alias, which is wrong, mIRC will actually try to execute the command /alias, which is a valid command in mIRC to define aliases dynamically.
 +
 +
'''Note''': these aliases are empty for the sake of the example.
 +
 +
=== <span style="color: #9E1010;">Good Examples</span> ===
 +
<source lang="mIRC">
 +
alias first {
 +
 +
}
 +
alias second {
 +
 +
}
 +
</source> This is correct, the alias second is defined after the first alias, it could also be defined before, the order in which aliases are defined is not important.
  
 
== Identifiers ==
 
== Identifiers ==

Revision as of 08:39, 12 October 2015

This article focuses on the very basics of mIRC Scripting. The target audience is people with no knowledge, or very limited knowledge, of the mIRC scripting language.

Where does the code go?

All of your code, regardless of its type, should go in the Script Editor. To open the script editor press-and-hold the <ALT> key on your keyboard, and then tap the R key (<Alt>+R). Alternatively, you can go to the Tools Menu -> Script editor.

Below is a screen shot of the mIRC Script Editor:

Remote Editor

You will notice that there are five selectable tabs: Aliases, Popups, Remotes, Users, and Variables. Let's try and get you familiar with each one. Before we dive into what these little (or rather big) guys do, let's get to know some basics first.

The very basics

Let's take a few moments to help familiarize you with the following key components:

Statements

Every script is composed of one or more statements. A statement describes something that needs to happen. Each statement must go on its own line, or it must be separated by a pipe, which is the '|' symbol.

If separated by a pipe, the pipe itself must have a space in front and a space after it, otherwise it's not seen as a delimiter of statements.

For example, the following two are the same:

Piping
statement 1 | statement 2 | statement 3 | statement 4
Code blocks
statement 1
statement 2
statement 3
statement 4

What's with the slashes?

If you asked any script related question in a help channel, you were probably told to type some code that begin with a forward slash. That's because you can execute code which is saved in the editor, but you can also execute anything from the editbox.

In order to execute any code from the mIRC editbox (the box where you normally type all of your text), you must prefix the code with at least one forward slash.

You may use two forward slash, the difference between using one or two forward slash is that with one, the rest of the line is not interpreted, we will discuss this difference later.

We usually refer to commands by prefixing them with a slash.

/echo command

The most common type of statements are commands. Commands are a way to tell mIRC to perform a basic operation. By far the most common command you will be using is the /echo command. The /echo command simply prints text to the screen. Every echo command prints on a line of its own.

Let's dive right into an example! Type the following code into your editbox:

//echo Hello World!

When you are finished typing this echo command, hit your Return or Enter key on your keyboard. You should see the following result (Note: Your editbox will not have anything in it, it will be cleared once you press the Enter or Return key):

Hello World!

Hello edit.png

Recall we said earlier that multiple statements can be combined by using the pipe '|'? Let's print 3 lines to the screen using the echo command and some pipes. Type the following code into your editbox (Remember to hit the Return or Enter keys from now on):

//echo Scripting | echo Is | echo Fun!

You should hopefully see the following results:

Scripting
Is
Fun!

Fun edit.png

Note: As you may have noticed, from the editbox, you can only pipe statements, you can't use newlines.

You will notice that after the first //echo command, once we've piped, we do not need to type anymore slashes; this is because mIRC interprets the rest of the statements via the first initial two slashes. If you use one slash here, "Scripting | echo Is | echo Fun!" will be echoed, because the pipes have not been interpreted as statements seperator, we usually refer to something that can be interpreted that is not interpreted as 'plain text'. We also refer to the processing of anything special (we've only seen the pipe character for now, but they are others) as 'evaluation', we will discuss it later.

Let's make it into an alias, shall we?

Aliases are used to describe any piece of scripting code that can be reused. Aliases have a name by which we can refer to them, and they also have a body. The body of an alias contains a statement, or a list of statements, that execute(s) when we call that alias. You can think of aliases as commands, much like the echo command is. All aliases can be called from your edit box by preceding them with one or two forward-slashes, just like commands.

Basic Alias

A basic alias will look something like this:

alias name <statement>

We can tweak the statement of this alias just a little in order to perform multiple statements through the use of piping:

alias name statement 1 | statement 2 | statement 3

Notice that with the piping, this alias now performs multiple actions.

Let's make the code we used above to print "Scripting Is Fun!", all on separate lines, and call this new alias "fun":

alias fun echo Scripting | echo Is | echo Fun!

Before we continue, let us note a few things regarding the above code:

  1. The two // were removed; we only really need one or two forward-slashes when we want to execute code directly from the editbox. Using slashes in your script editor adds nothing but clutter.
  2. The statements in the editor are always executed as though two forward slashes were used, you cannot force a statement not to be evaluated.
  3. Because we used the alias keyword, the code must go in the Remote Tab of the script editor. In order to use that code from the aliases tab, you must remove the "alias" keyword. The rest of the code stays the same.

Remote tab

Fun alias 1.png

Aliases tab

Fun alias 2.png

Note: When you want to execute an alias, you would refer to it as wanting to call the alias.

To call on our alias fun, all we have to do is use its name, preceded by a forward-slash in any mIRC editbox:

/fun

Note: Two forward-slashes will also call it of course, but there are nothing to be evaluated so it would be the same.

That should print our text again:

Scripting
Is
Fun!

A block of code:

When we have a group of related commands, we call it a block of code. Most scripts, however, are not as short as our example and putting it all on one long line, or piping, is messy. We can use the second format we talked about, which is storing each statement on a new line, in order to keep our code clean and easily editable. The way that we accomplish the task of creating a code block is to tell mIRC "this block of code belongs to this alias". We do that by enclosing the block of code in a pair of brackets:

alias name {
  statement 1
  statement 2
  statement 3
}

But we have just seen three statements with piping; we didn't need to use a pair of brackets there?

Well, in fact when we use newlines as a seperator of statements, the syntax force us to use the pair of bracket, otherwise mIRC cannot reliably know where your alias definiton finishes.

You can use bracket with piping of course, though keep in mind it's cleaner to get statements on a new line.

We don't need the brackets in the piping version because they are only there to help distinguish between two or more blocks of code:

alias fun echo Scripting | echo Is | echo Fun!
This can be seen as one block of code:
alias fun { echo Scripting | echo Is | echo Fun! }
All commands belong to the alias fun definition, they are all on the same 'root'

Some statements, such as the conditional statements, allow you to create others blocks of code. Within those new blocks of code, you may use brackets. However, if the context allows it, you can get around using them, the example below illustrates this scenario:

alias fun if (1 == 1) echo Scripting | if (2 == 3) echo Is | echo = | echo Fun!
In the example above, the statement echo Scripting belongs to the if (1 == 1) statement. The same is true for echo Is, which, however, will not be echoed because the condition is not true. echo = does not belong to the if (2 == 3) statement like echo Is does; the reason being that we did not use a pair of brackets for the if (2 == 3) statement. Overall, the above example will echo:
Scripting = Fun!
. This is equivalent to:
alias fun { if (1 == 1) { echo Scripting } | if (2 == 3) { echo Is } | echo = | echo Fun! }

This should help you understand may be used brackets are used. They are others situations with if statements where not using bracket will be a problem for example, remember the bracket helps mIRC identifying the block of code, but also the condition, when using a if/elseif/while statement, Here is a final example:

alias fun {
 if (1 == 1) echo Scripting
 if (2 == 3) echo Is 
 if (3 == 3) { echo More | echo Or | echo Less }
 echo Fun!
}

This time the statement's echoing of More, Or and Less all belong to the same if (3 == 3) statement. If you were to change that condition to something such as if (3 == 4), none of the echo commands will show up because this if statement is false.

A few notes about the language limitations:

  1. The opening bracket ({) must be on the same line as the alias keyword
  2. The opening bracket must not touch anything
  3. The closing bracket must not touch anything else
  4. The closing bracket must be the last part of the block of code

Note: Those limitations are only true for aliases, others context of the language can have some differences

Right Examples

alias example { echo hello! }

Note the spaces before and after both the opening and closing brackets. This is a good example of a proper code block.

alias example {
  echo hello!
}

The initial opening bracket is on the same line as the alias name, and it has proper spacing before itself. The statement within the block is also perfectly executed, and the closing bracket is on its own line. This is another example of a proper code block.

Wrong Examples

alias example{echo hello! }

The opening bracket is touching the "example" and "echo".

alias example { echo hello!}

The closing bracket is touching the "hello!".

alias example
{
  echo hello!
}

The opening bracket must be on the same line as the "alias" keyword.

Using a block of code

Let's reuse the fun alias from before. However, this time we will put each statement on its own line:

alias fun {
  echo Scripting
  echo Is
  echo Fun!
}

Notice how this is a perfect example of a Good code block, much like the sample that we viewed above? If you are noticing the repetitiveness of the echo command, don't worry, in later examples we will show you tricks on how to get around repeating certain reused commands in your code.

Comments

Comments are normal, readable text that can be placed inside of your script, and they are a good practice to help better explain to other scripters what's going on in your code. Technically speaking, a comment can say whatever you want it to say, and they are ignored when the program is executed, meaning they have no effect on the actual behavior of the code.

All comments are preceded by the ; character, which is the semi-colon.

Single-line Comments

The most basic comment is the single-line comment, which has the following syntax:

; This is single-line comment.

Note on how the comment begins with a semicolon and ends at the end of the line; anything on this line is now ignored.

Here is another basic example of a single-line comment:

alias fun {
  ; print "Scripting"
  echo Scripting
  ; print "Is"
  echo Is
  ; print "Fun"
  echo Fun!
}

Fun comment.png

Multi-line Comments

The second type of comment is the multi-line comment. A multi-line comment can, as its name suggests, span multiple lines. Multi-line comments are enclosed between the /* & */ characters. The syntax for a multi-line comment is:

/* This is
  a multi-line
  comment!
*/

Your text must go between the /* and the */ in order for it to be treated as a comment.

A few notes about the language limitations:

  1. Text may touch the opening /* on the right; however, /* must start the line
  2. The closing */ must be on a line of its own

Right Examples

/* testing
   out
   a multi-line
   comment
*/

or

/*
   testing
   out
   a multi-line
   comment
*/

In both of the above examples, the opening comment parameters are properly executed, the lines are spaced out and the closing parameters are by themselves. These are both examples of proper multi-line comment blocks.


Wrong Examples

/* testing
   test */

The */ is not on a line of Its own.


/* comment */

The */ is not on a line of Its own.

Multiple block of code

You can have multiple aliases in one single file but you cannot define an alias inside another alias, each alias must go on what we call the 'root' level, or 'top' level.

When you start with an empty script file, you're on the top level, meaning you can add an alias there. Inside that alias, you're not on the top level, you're inside the alias, which can be seen as the level depth '1'. So if you want to add more aliases, always do so on the top level:

Wrong Example

alias first {
 
alias second {
 
}
 
}
There the second alias is defined inside the first alias, which is wrong, mIRC will actually try to execute the command /alias, which is a valid command in mIRC to define aliases dynamically.

Note: these aliases are empty for the sake of the example.

Good Examples

alias first {
 
}
alias second {
 
}
This is correct, the alias second is defined after the first alias, it could also be defined before, the order in which aliases are defined is not important.

Identifiers

Main article: Aliases


Before we wrap up this tutorial, we need to talk about one last concept: $identifiers. All identifiers have a dollar symbol sigil and have the following syntax:

$name
;or 
$name(<argument 1>, <argument 2>, <argument 3>, ...)

Identifiers are very similar to commands except that we use identifiers when we want a value.

Commands seperate their parameters/arguments by space, while identifiers use a comma. Both commands and identifiers are also referred to as alias(es): you create a custom command/identifier by creating an alias.

For example, if we want to print out our current nickname, we would use the following code:

//echo -a $me

$rand()

One of the most common operations we use is to generate random numbers. This is where the $rand identifier comes into play; it can generate a random number between a given range. The $rand() has the following syntax:

$rand(<low>, <high>)

Given both low bound and high bound number values, $rand will return a random number in between, and including, the two numbers. For example:

alias random {
  echo The dice rolled on the floor .... $rand(1, 6)
}

Here is what we got when we called out /random alias a few times:

Random example.png The results that mIRC generates for you will be different than the ones listed above in the screenshot; this is the nature of the $rand identifier.

Evaluating/Interpreting

Remember what we said about the slashes in the editbox when executing commands? If you use two of them it will indicate to mIRC that it must evaluate the line. In the script editor, you don't need any slash as the lines are always executed as though two of them were used. The difference only applies when you execute commands from within an editbox inside mIRC.

Interpreting, which is commonly referred to as 'evaluating', a line or an expression means the line/expression is processed according to the language's semantic. This is how mIRC can tell what is what and how to proceed. Evaluations also include looking for meaningful characters like '{' and '}' for blocks, '|' for piping, and so on. In order to get the value of an identifier, you would simply evaluate it like in the example below:

//echo -a $me | echo -a $me

The // indicates the the line should be evaluated. $me is replaced with the corresponding value twice because the spaced out pipe '|' is interpreted as the delimiter of commands.

/echo -a $me | echo -a $me

The / indicates that the line should not be evaluated. $me' is returned literally, as plain text as we saw earlier, and therefore is not replaced. The pipe is also not interpreted.

variables are also special, in that they need to be evaluated the same way as identifiers. Evaluating variables is the only way to extract the value that they hold.

On your own:

Below are a very few, basic commands that you can use to experiment with in a safe manner. Go ahead, try them out!

Colors:

Just like you can add colors when you talk by typing CTRL+K on your keyboard, and then selecting a color number, you can do the same in your aliases. Here is a simple example:

alias example {
  echo -a �3This �4is �6a �10cool �15example�1.
}

You may have noticed that we added a strange new thing, -a. The -a is called a switch; switches slightly alter the way a command behaves. In the case of the /echo command, the -a switch specifies that we wanted the command to echo to the current active window. There is another switch, the -s switch, which can be used to tell the echo command to print to the status window instead, regardless of which window you have open.

Below is an example of how we use the -a switch:

Color example.png

Will produce:

This is a cool example.
//echo -a The number �42� is even.

Will produce the following result:

The number  is even.

Notice that the number is not showing. That's because it was considered part of the color number '42'. Prefixing the color value with a zero will fix this issue:

//echo -a The number �042� is even.

Will produce the following result:

The number 2 is even.

Actions

Actions are very similar to your normal channel messages, except that they are displayed in a slightly different manner.

; This is good for the channel you are in right now:
me <message>
; This is good for any channel you specify (as long as you are in that channel)
describe <#channe> <message>

For example:

alias feel {
  me Feels Happy!
  me Leaves
}

The code should produce something like this (Your name will obviously be different):

* @FooBar Feels Happy!
* @FooBar Leaves

Action example.png

If we wanted to specify a channel, we could have used:

alias feel {
  describe #MyChannel Feels Happy!
  describe #MyChannel Leaves
}

Where do we go from here?

By now you should be grasping the basics of mSL, or at the very least beginning to understand how things work. It is highly recommended that you take it upon yourself to play around with the code on your own, in order to see what happens when you change different things around.

Next up are the aliases. If you feel comfortable with aliases, feel free to move on to variables.