From WikiChip
mirc/commands/sockudp
< mirc‎ | commands
Revision as of 20:37, 2 July 2014 by 83.204.132.94 (talk) (Created page with "The '''/sockudp command''' allows you to send data to a specific address at a specific port destination. '''Note''': if /sockudp fails, it sets $sock().wserr to the error val...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

The /sockudp command allows you to send data to a specific address at a specific port destination.

Note: if /sockudp fails, it sets $sock().wserr to the error value, and trigger on sockwrite with $sockerr set etc.

Synopsis

/sockudp -bntkd [bindip] <name> [port] <ipaddress> <port> [numbytes] [text|%var|&binvar]

Switches

  • -b - Indicates that you are specifying the numbytes value which is the number of bytes you want send, the full line is sent otherwise
  • -n - Appens a $crlf to the line being sent if it's not a &binvar or if does not already end with a $crlf
  • -t - Forces mIRC to send anything beginning with a & as plain text
  • -k - Keeps the socket opened
  • -d - Means you have specified the ip address as the bind address

Parameters

  • [bindip] - If -d has been specified, the ip address you want to use as the bind address.
  • <name> - The sockname name.
  • [port] - If specified, the local port to use, otherwise mIRC choose one randomly.
  • <ipaddress> - The ip address you want to send to information to, use you localhost 127.0.0.1 with -k to create a listening socket.
  • <port> - The port you want to send to information to, that's your listening port if you create a server.
  • [numbytes] - If -b has been specified, indicates the number of bytes you want to send.

Example

Compatibility

Added: mIRC v5.5

Added On: 08/01/99


Note: Individual switches were not taken into consideration.

See also