The /bindip command sets IP binding on or off. Additionally, an IP address to be used can be specified. When used without parameters mIRC indicates if it's on or off.
/bindip <on|off> [ip_address]
- <on|off> - Sets IP binding on or off
- [ip_address] - IP address to use
;Check if IP binding is on or off /bindip ;Turn binding on, set IP /bindip on 220.127.116.11 ;Turn IP binding off /bindip off
The above example will output:
* Binding is off * Binding is on (18.104.22.168) * Binding is off
Note: Individual switches were not taken into consideration.