Intel 4004 Developer Intel Introduction date March 1971 Model 4004 Transistors 2,300 Cores 1 Clock 740 KHz Bus Width 4-bit Lithography 10μm Max TDP 0.63 W Memory Specs Max Memory 4KB (program) 640B (RAM) Packaging Package 16-pin DIP

The Intel 4004 was the first commercially available microprocessor in history released by Intel Corporation in 1971. The 4004 was a 4-bit CPU designed for use in the Busicom 141-PF printing calculator. The chip, which clocked at 740 KHz, employed a 10µm process silicon-gate, capable of executing 92,000 instructions per second. The chip was capable of accessing 4KB of program memory and 640 bytes of RAM. The 4004 was part of the Intel MCS4 system.

The microprocessor had a limited architecture such as only 3-levels deep stack, a complex memory access scheme, and no interrupt support.

History

An ad for the 4004 in the Nov. 15, 1971 issue of Electronic News

Before Federico Faggin joined Intel in 1970, the development of the 4004 was stall was dreadful. At Intel, Federico developed several design innovations that made it possible to fit the microprocessor in one chip, including new methodology for random logic chip design using silicon gate technology.. He developed the 4004 testing tool, the chip and logic design together with the layout of all the chips of the entire MCS-4 system.

In November of 1971, a memory chip manufacturer by the name Intel publicly announcement the world's first single chip microprocessor, in the Nov. 15, issue of Electronic News. The prophetic ad read: "Announcing a new era in integrated electronics". The chip was designed by Federico Faggin, Ted Hoff, and Masatoshi Shima and received U.S. Patent #3,821,715. The original 4004 chips were shipped in a 16-pin ceramic DIP.

Variations

A National Semiconductor version of the 4004, INS4004J

Three primary source variations were produced by Intel: C4004, D4004, and the P4004. The Intel C4004 is the first chip to be manufactured. It had the gray traces visible on the white ceramic package itself. The C4004 was produced up until mid 1976. The Intel D4004 was first produced around mid 1976, had a plastic and black ceramic package. The Intel P4004 is the plastic packaging version.

Only one known secondary source exists, made by National Semiconductor since mid-1975. The National Semiconductor produced two versions: INS4004J and INS4004D. The INS4004J is a 16-pin black ceramic DIP. The INS4004D version is a 16-pin side-brazed ceramic DIP.

Manufacturer	Model	Package
Intel	C4004	16-pin Ceramic DIP
Intel	D4004	16-pin Ceramic DIP
Intel	P4004	16-pin Plastic DIP
National Semiconductor	INS4004D	16-pin Ceramic DIP
National Semiconductor	INS4004J	16-pin side-brazed Ceramic DIP

Collectability

Due to its notability statues and historic value, the Intel 4004 is very collectible among collectors and non-collector alike. The C4004, white ceramic package are the most sought-after version which sells for hundreds of dollars.

Pinout

Pinout diagram of the Intel 4004

The 4004 has 16 pins that are used for i/o, memory controller, clock phases, power, and reset.

Pinout & Description

Pin #	Pin Name	Purpose	Explanation
1	D0	Bidirectional data bus pins	Address and data communication to the ROM and RAM occurs on D0-D3.
2	D1
3	D2
4	D3
5	Vss	Main Supply
6	Clock Phase 1	Clock inputs
7	Clock Phase 2
8	Sync	ROM & RAM Sync	Synchronizes the ROM and RAM by signaling the clock is on the raising edge.
9	Reset	Reset flag	A logic 1 clears all processor status registers and forces the program counter to jump to address 0x0. The RESET signal must be on for at least 64 clock cycles to take effect.
10	Test	Test logic state	Signal can be tested via the JCN instruction.
11	CM-ROM	CM-ROM output	ROM selection signal used to retrieve data from memory.
12	VDD	VSS -15±5%
13	CM-RAM3	CM-ROM outputs	Bank selection signal for the 4002 RAM chips in the system.
14	CM-RAM2
15	CM-RAM1
16	CM-RAM0