From WikiChip
Difference between revisions of "equivalent oxide thickness"

m (Reverted edits by 14.139.125.73 (talk) to last revision by Inject)
Line 1: Line 1:
 
{{title|Equivalent Oxide Thickness (EOT)}}{{confuse|oxide thickness|l1=Oxide Thickness (t<sub>OX</sub>)}}
 
{{title|Equivalent Oxide Thickness (EOT)}}{{confuse|oxide thickness|l1=Oxide Thickness (t<sub>OX</sub>)}}
'''Equivalent Oxide Thickness''' ('''EOT'''), represented by <code>t<sub>eq</sub></code> or <code>t<sub>OXE</sub></code>, is the [[gate oxide thickness]] of the SiO<sub>2</sub> layer of a [[transistor]] that would be required to achieve similar capacitance density as the [[high-κ]] material used.
+
'''Equivalent Oxide Thickness''' ('''EOT'''), represented by <code>t<sub>eq</sub></code> or <code>t<sub>OX</sub></code>, is the [[gate oxide thickness]] of the SiO<sub>2</sub> layer of a [[transistor]] that would be required to achieve similar capacitance density as the [[high-κ]] material used.
  
 
A [[gate dielectric]] with a [[dielectric constant]] that is substantially higher than that of SiO<sub>2</sub> will initially have a much smaller equivalent electrical thickness. This key feature allowed for the industry to continue on with [[Moore's Law]]. As the semiconductor industry began to experiment with transitioning from a SiO<sub>2</sub> gate oxide to a [[high-κ]] material, EOT can be used to quickly compare those materials using existing SiO<sub>2</sub>-based models.
 
A [[gate dielectric]] with a [[dielectric constant]] that is substantially higher than that of SiO<sub>2</sub> will initially have a much smaller equivalent electrical thickness. This key feature allowed for the industry to continue on with [[Moore's Law]]. As the semiconductor industry began to experiment with transitioning from a SiO<sub>2</sub> gate oxide to a [[high-κ]] material, EOT can be used to quickly compare those materials using existing SiO<sub>2</sub>-based models.

Revision as of 13:31, 28 February 2021

Not to be confused with Oxide Thickness (tOX).

Equivalent Oxide Thickness (EOT), represented by teq or tOX, is the gate oxide thickness of the SiO2 layer of a transistor that would be required to achieve similar capacitance density as the high-κ material used.

A gate dielectric with a dielectric constant that is substantially higher than that of SiO2 will initially have a much smaller equivalent electrical thickness. This key feature allowed for the industry to continue on with Moore's Law. As the semiconductor industry began to experiment with transitioning from a SiO2 gate oxide to a high-κ material, EOT can be used to quickly compare those materials using existing SiO2-based models.

Equation

One can treat MOSFET behavior like two parallel plate capacitors,

Equation upper C Subscript o x Baseline equals StartFraction upper A epsilon Subscript r Baseline epsilon 0 Over t Subscript o x Baseline EndFraction

Where Equation upper A epsilon Subscript r is the relative dielectric constant of SiO2 in our case. Therefore one calculate the equivalent oxide thickness as,

Equation StartFraction upper A epsilon Subscript upper S i upper O Baseline 2 Baseline epsilon 0 Over t Subscript o x Baseline EndFraction equals StartFraction upper A epsilon Subscript h i g h minus kappa Baseline epsilon 0 Over t Subscript o x e Baseline EndFraction
Equation t Subscript o x e Baseline equals StartFraction CrossOut upper A EndCrossOut epsilon Subscript h i g h minus kappa Baseline CrossOut epsilon 0 EndCrossOut Over CrossOut upper A EndCrossOut epsilon Subscript upper S i upper O Baseline 2 Baseline CrossOut epsilon 0 EndCrossOut EndFraction t Subscript o x Baseline equals StartFraction epsilon Subscript h i g h minus kappa Baseline Over epsilon Subscript upper S i upper O Baseline 2 Baseline EndFraction t Subscript o x

Note that the dielectric constant SiO2 is 3.9

Equation t Subscript o x e Baseline equals StartFraction epsilon Subscript h i g h minus kappa Baseline Over 3.9 EndFraction t Subscript o x

Where toxe is the equivalent oxide thickness, εhigh-κ is the dielectric constant of the high-κ material used, and tox is the physical oxide layer thickness.

Example

For example, consider Hafnium Dioxide (HfO2) which has an Equation epsilon Subscript r Baseline equals 24 (subject to variations in temperature). A layer of just 1 nm in thickness would result in an equivalent oxide thickness of around Equation t Subscript o x e Baseline equals StartFraction 24 Over 3.9 EndFraction 1 nm equals 6.15 nm . This is indeed the material used by Intel following their transition to high-κ at the 45 nm process node.