From WikiChip
Difference between revisions of "1.5 µm lithography process"

(14 intermediate revisions by 3 users not shown)
Line 1: Line 1:
−
{{Lithography processes}}
+
{{lithography processes}}
−
The '''1.5μm lithography process''' was the semiconductor process technology used by some semiconductor companies between 1982 to 1985.
+
The '''1.5 µm lithography process''' was the semiconductor process technology used by the major semiconductor companies in the mid 1980s. This process had an effective channel length of roughly 1.5 µm between the source and drain. By the late 80s this process was replaced by [[1.3 µm]], [[1.2 µm]], and [[1 µm]] processes.
  
−
== Microprocessors ==
+
== Industry ==
−
* [[Intel 80286]]
+
{{scrolling table/top|style=text-align: right; | first=Fab
−
* [[Intel 80386]]
+
|Process Name
 +
|1st Production
 +
|Contacted Gate Pitch
 +
|Interconnect Pitch (M1P)
 +
|Metal Layers​
 +
|SRAM bit cell
 +
|Wafer
 +
}}
 +
{{scrolling table/mid}}
 +
|-
 +
! [[Intel]] || [[Intel]] || [[Intel]] || [[HP]] || [[AMD]]
 +
|- style="text-align: center;"
 +
| HMOS-II || HMOS-E || P646 (CHMOS III) || NMOS III ||
 +
|- style="text-align: center;"
 +
| 1982 || 1982 || 1985 || 1981 || 1982
 +
|-
 +
| ? nm || ? nm  || ? nm  || 1.5 µm ||
 +
|-
 +
| ? nm ||  ? nm || ? nm || 2.5 µm ||
 +
|-
 +
| 2 || ? || 2 || 2 || 2
 +
|-
 +
| ? µm<sup>2</sup> ||  ? µm<sup>2</sup> ||  ? µm<sup>2</sup> || ? µm<sup>2</sup> || ? µm<sup>2</sup>
 +
|-
 +
| 125 mm  || || 150 mm  ||  ||
 +
{{scrolling table/end}}
 +
 
 +
=== Design Rules ===
 +
{| class="wikitable collapsible collapsed"
 +
|-
 +
! colspan="2" | HP NMOS-III Design Rules
 +
|-
 +
! Layer !! Description
 +
|-
 +
| Oxide || 450 nm thick silicon dioxide<br>1.5 µm x 1.5 µm minimum contact area, zero overlap to polysilicon, zero overlap of first metal layer
 +
|-
 +
| M1 || 1.5 µm wide line / 1.0 µm space<br>0.4 ohm/square sheet resistance
 +
|-
 +
| Intemediate Oxide || 550 nm-thick silicon dioxide<br>1.5 µm x 2.0 µm minimum contact area, zero overlap to first metal layer<br>2.0 µm overlap of second metal layer to via
 +
|-
 +
| M2 || 5.0 µm wide line / 3.0 µm space<br>0.4 ohm/square sheet resistance
 +
|}
 +
 
 +
== 1.5 µm Microprocessors ==
 +
* AMD
 +
** {{amd|Am186}}
 +
** {{amd|Am286}}
 +
* Intel
 +
** {{intel|80286}}
 +
** {{intel|80386 DX}}
 +
** {{intel|80387}}
 +
* HP
 +
** {{hp|FOCUS}}
 +
* Dec
 +
** {{decc|Rigel}}
 +
{{expand list}}
 +
 
 +
== 1.5 µm Microarchitectures ==
 +
* Intel
 +
** {{intel|microarchitectures/80386|80386}}
 +
{{expand list}}
  
−
{{stub}}
 
 
[[Category:Lithography]]
 
[[Category:Lithography]]

Revision as of 13:55, 5 September 2016

basic wafer drawing.svg Semiconductor lithography processes technology
v · d · e

The 1.5 µm lithography process was the semiconductor process technology used by the major semiconductor companies in the mid 1980s. This process had an effective channel length of roughly 1.5 µm between the source and drain. By the late 80s this process was replaced by 1.3 µm, 1.2 µm, and 1 µm processes.

Industry

Fab
Process Name​
1st Production​
Contacted Gate Pitch​
Interconnect Pitch (M1P)​
Metal Layers​​
SRAM bit cell​
Wafer
Intel Intel Intel HP AMD
HMOS-II HMOS-E P646 (CHMOS III) NMOS III
1982 1982 1985 1981 1982
 ? nm  ? nm  ? nm 1.5 µm
 ? nm  ? nm  ? nm 2.5 µm
2  ? 2 2 2
 ? µm2  ? µm2  ? µm2  ? µm2  ? µm2
125 mm 150 mm

Design Rules

1.5 µm Microprocessors

This list is incomplete; you can help by expanding it.

1.5 µm Microarchitectures

This list is incomplete; you can help by expanding it.

Retrieved from "https://en.wikichip.org/w/index.php?title=1.5_µm_lithography_process&oldid=24013"